The trucking industry has made a large historical impact since the early 20th century. It has affected the U.S. both politically as well as economically since the notion has begun. Previous to the invention of automobiles, most freight was moved by train or horse-drawn carriage. Trucks were first exclusively used by the military during World War I.
After the war, construction of paved roads increased. As a result, trucking began to achieve significant popularity by the 1930's. Soon after trucking became subject to various government regulation, such as the hours of service. During the later 1950's and 1960's, trucking accelerated due to the construction of the Interstate Highway System. The Interstate Highway System is an extensive network of freeways linking major cities cross country.
In many countries, driving a truck requires a special driving license. The requirements and limitations vary with each different jurisdiction.
Beginning the the early 20th century, the 1920's saw several major advancements. There was improvement in rural roads which was significant for the time. The diesel engine, which are 25-40% more efficient than gas engines were also a major breakthrough. We also saw the standardization of truck and trailer sizes along with fifth wheel coupling systems. Additionally power assisted brakes and steering developed. By 1933, all states had some form of varying truck weight regulation.
According to the U.S. Census Bureau, 40 million United States citizens have moved annually over the last decade. Of those people who have moved in the United States, 84.5% of them have moved within their own state, 12.5% have moved to another state, and 2.3% have moved to another country.
Invented in 1890, the diesel engine was not an invention that became well known in popular culture. It was not until the 1930's for the United States to express further interest for diesel engines to be accepted. Gasoline engines were still in use on heavy trucks in the 1970's, while in Europe they had been entirely replaced two decades earlier.
Many modern trucks are powered by diesel engines, although small to medium size trucks with gas engines exist in the United States. The European Union rules that vehicles with a gross combination of mass up to 3,500 kg (7,716 lb) are also known as light commercial vehicles. Any vehicles exceeding that weight are known as large goods vehicles.
All cars must pass some sort of emission check, such as a smog check to ensure safety. Similarly, trucks are subject to noise emission requirement, which is emanating from the U.S. Noise Control Act. This was intended to protect the public from noise health side effects. The loud noise is due to the way trucks contribute disproportionately to roadway noise. This is primarily due to the elevated stacks and intense tire and aerodynamic noise characteristics.
As we know in the trucking industry, some trailers are part of large trucks, which we call semi-trailer trucks for transportation of cargo. Trailers may also be used in a personal manner as well, whether for personal or small business purposes.
In some states, a business route is designated by adding the letter "B" after the number instead of placing a "Business" sign above it. For example, Arkansas signs US business route 71 as "US 71B". On some route shields and road signs, the word "business" is shortened to just "BUS". This abbreviation is rare and usually avoided to prevent confusion with bus routes.
The United States' Interstate Highway System is full of bypasses and loops with the designation of a three-digit number. Usually beginning with an even digit, it is important to note that this pattern is highly inconsistent. For example, in Des Moines, Iowa the genuine bypass is the main route. More specifically, it is Interstate 35 and Interstate 80, with the loop into downtown Des Moines being Interstate 235. As it is illustrated in this example, they do not always consistently begin with an even number. However, the 'correct' designation is exemplified in Omaha, Nebraska. In Omaha, Interstate 480 traverses the downtown area, which is bypassed by Interstate 80, Interstate 680, and Interstate 95. Interstate 95 then in turn goes through Philadelphia, Pennsylvania. Furthermore, Interstate 295 is the bypass around Philadelphia, which leads into New Jersey. Although this can all be rather confusing, it is most important to understand the Interstate Highway System and the role bypasses play.
A relatable reality t.v. show to the industry is the show Ice Road Truckers, which premiered season 3 on the History Channel in 2009. The show documents the lives of truck drivers working the scary Dalton Highway in Alaska. Following drivers as they compete to see which one of them can haul the most loads before the end of the season. It'll grab you with its mechanical problems that so many have experienced and as you watch them avoid the pitfalls of dangerous and icy roads!
In 1938, the now-eliminated Interstate Commerce Commission (ICC) enforced the first Hours of Service (HOS) rules. Drivers became limited to 12 hours of work within a 15-hour period. At this time, work included loading, unloading, driving, handling freight, preparing reports, preparing vehicles for service, or performing any other duty in relation to the transportation of passengers or property.
The ICC intended for the 3-hour difference between 12 hours of work and 15 hours on-duty to be used for meals and rest breaks. This meant that the weekly max was limited to 60 hours over 7 days (non-daily drivers), or 70 hours over 8 days (daily drivers). With these rules in place, it allowed 12 hours of work within a 15-hour period, 9 hours of rest, with 3 hours for breaks within a 24-hour day.
DOT officers of each state are generally in charge of the enforcement of the Hours of Service (HOS). These are sometimes checked when CMVs pass through weigh stations. Drivers found to be in violation of the HOS can be forced to stop driving for a certain period of time. This, in turn, may negatively affect the motor carrier's safety rating. Requests to change the HOS are a source of debate. Unfortunately, many surveys indicate drivers routinely get away with violating the HOS. Such facts have started yet another debate on whether motor carriers should be required to us EOBRs in their vehicles. Relying on paper-based log books does not always seem to enforce the HOS law put in place for the safety of everyone.
Implemented in 2014, the National Registry, requires all Medical Examiners (ME) who conduct physical examinations and issue medical certifications for interstate CMV drivers to complete training on FMCSA’s physical qualification standards, must pass a certification test. This is to demonstrate competence through periodic training and testing. CMV drivers whose medical certifications expire must use MEs on the National Registry for their examinations.
FMCSA has reached its goal of at least 40,000 certified MEs signing onto the registry. All this means is that drivers or movers can now find certified medical examiners throughout the country who can perform their medical exam. FMCSA is preparing to issue a follow-on “National Registry 2” rule stating new requirements. In this case, MEs are to submit medical certificate information on a daily basis. These daily updates are sent to the FMCSA, which will then be sent to the states electronically. This process will dramatically decrease the chance of drivers falsifying medical cards.
Logistics is generally the ability to organize and put in place many complex operations at a single time. It is the management of the flow of things to meet the needs of customers or corporations. Resources managed in logistics includes tangible items such as food, materials, animals, equipment, etc. Not to mention the items that are not tangible such as time and information. This means that the movement of physical items, such as in the moving industry, involves a clear understanding of solid workflow. Such logistics can involve the handling of necessary materials, producing, packaging, inventory, transportation, warehousing, and often security.
In 1991 the film "Thelma & Louise" premiered, rapidly becoming a well known movie. Throughout the movie, a dirty and abrasive truck driver harasses the two women during chance encounters. Author Michael Dunne describes this minor character as "fat and ignorant" and "a lustful fool blinded by a delusion of male superiority". Thelma and Louise exact their revenge by feigning interest in him and then blowing up his tanker truck full of gas.
The year of 1977 marked the release of the infamous Smokey and the Bandit. It went on to be the third highest grossing film that year, following tough competitors like Star Wars and Close Encounters of the Third Kind. Burt Reynolds plays the protagonist, or "The Bandit", who escorts "The Snowman" in order to deliver bootleg beer. Reynolds once stated he envisioned trucking as a "hedonistic joyride entirely devoid from economic reality"
Another action film in 1977 also focused on truck drivers, as was the trend it seems. Breaker! Breaker! starring infamous Chuck Norris also focused on truck drivers. They were also displaying movie posters with the catch phrase "... he's got a CB radio and a hundred friends who just might get mad!"
Tracing the origins of particular words can be quite different with so many words in the English Dictionary. Some say the word "truck" might have come from a back-formation of "truckle", meaning "small wheel" or "pulley". In turn, both sources emanate from the Greek trokhos (τροχός), meaning "wheel", from trekhein (τρέχειν, "to run").
Heavy trucks. A cement mixer is an example of Class 8 heavy trucks. Heavy trucks are the largest on-road trucks, Class 8. These include vocational applications such as heavy dump trucks, concrete pump trucks, and refuse hauling, as well as ubiquitous long-haul 6×4 and 4x2 tractor units. Road damage and wear increase very rapidly with the axle weight. The axle weight is the truck weight divided by the number of axles, but the actual axle weight depends on the position of the load over the axles. The number of steering axles and the suspension type also influence the amount of the road wear. In many countries with good roads, a six-axle truck may have a maximum weight over 50 tons (49 long tons; 55 short tons).
In today's society, there are rules and regulations everywhere you go, the same goes for commercial vehicles. The federal government has strict regulations that must be met, such as how many hours a driver may be on the clock. For example, 11 hours driving /14 hours on-duty followed by 10 hours off, with a max of 70 hours/8 days or 60 hours/7 days. They can also set rules deciding how much rest and sleep time is required, however, these are only a couple of regulations set. Any violations are often subject to harsh penalties. In some cases, there are instruments to track each driver's hours, which are becoming more necessary.