South Dennis Movers Top Rated

(888) 787-7813

16 Movers in South Dennis

Sponsored

LAST REVIEW

1 Reviewed 0 times, 0.0% customer satisfaction.

“This company has not reviews,

be the first!”

United States Massachusetts South Dennis

Let's simplify finding your mover. Firstly, you want to check out Moving Authority's services reviews. By reading the South Dennis, Massachusetts reviews of a mover, you are able to use them to your interests. We are using someone else's opinion about these services, that's why our reviews are super powerful and remain objective.

We powerfully, greatly, seriously, recommend researching the relocation company, you are considering, because, once you have become informed, you will be able to produce a minimal budget in preparation for the move. This way you have your own guideline to stay on track. Now that you've got an low-priced budget in mind, Moving Authority can help you retrieve a secure South Dennis, Massachusetts mover offering reasonably priced services. Moving Authority has wide listings of the awesome services so you can browse South Dennis, Massachusetts movers, whether you 're moving locally or cross country. It is crucial to obtain a free moving estimate with Moving Authority, this way you can make any necessary adjustments to your budgeted guideline and you will have a clear understanding of the price for your South Dennis, Massachusetts move.

Aside from the moving estimation, you can besides cause a detached moving price appraisal rightfulness on our web page, which is fundamentally a more exact approximation of your moving monetary value. This resourcefulness is exceedingly good, helpful, particularly for those with a calculated moving budget. Our company's resource can hit a globe of dispute before, during, and after your move. Fit Moving Authority self confidence to hold finding your South Dennis, Massachusetts moving service a understandable job.

South Dennis is located on Cape Cod in the center of the town of Dennis at 41°42′21″N 70°9′45″W  /  41.70583°N 70.16250°W  / 41.70583; -70.16250 . It is bordered by the town of Brewster to the northeast, the town of Harwich to the southeast, the CDPs of Dennis Port to the south and West Dennis to the southwest, the town of Yarmouth to the west, and the CDPs of Dennis and East Dennis to the north.
According to the United States Census Bureau , the South Dennis CDP has a total area of 4.7 square miles (12.3 km 2 ). 4.6 square miles (11.8 km 2 ) of it is land, and 0.19 square miles (0.5 km 2 ) of it (4.19%) is water.

Do you know?

Do you know quotes

The most basic purpose of a trailer jack is to lift the trailer to a height that allows the trailer to hitch or unhitch to and from the towing vehicle. Trailer jacks may also be used for the leveling of the trailer during storage. To list a few common types of trailer jacks are A-frame jacks, swivel jacks, and drop-leg jacks. Other trailers, such as horse trailers, have a built-in jack at the tongue for this purpose.

The Motor Carrier Act, passed by Congress in 1935, replace the code of competition. The authorization the Interstate Commerce Commission (ICC) place was to regulate the trucking industry. Since then the ICC has been long abolished, however, it did quite a lot during its time. Based on the recommendations given by the ICC, Congress enacted the first hours of services regulation in 1938. This limited driving hours of truck and bus drivers. In 1941, the ICC reported that inconsistent weight limitation imposed by the states cause problems to effective interstate truck commerce.

The intention of a trailer coupler is to secure the trailer to the towing vehicle. It is an important piece, as the trailer couple attaches to the trailer ball. This then forms a ball and socket connection. It allows for relative movement between the towing vehicle and trailer while towing over uneven road surfaces. The trailer ball should be mounted to the rear bumper or to a drawbar, which may be removable. The drawbar secures to the trailer hitch by inserting it into the hitch receiver and pinning it.   The three most common types of couplers used are straight couplers, A-frame couplers, and adjustable couplers. Another option is bumper-pull hitches in which case draw bars can exert a large amount of leverage on the tow vehicle. This makes it harder to recover from a swerving situation (thus it may not be the safest choice depending on your trip).

In the United States, shipments larger than about 7,000 kg (15,432 lb) are classified as truckload freight (TL). It is more efficient and affordable for a large shipment to have exclusive use of one larger trailer. This is opposed to having to share space on a smaller Less than Truckload freight carrier.

The public idea of the trucking industry in the United States popular culture has gone through many transformations. However, images of the masculine side of trucking are a common theme throughout time. The 1940's first made truckers popular, with their songs and movies about truck drivers. Then in the 1950's they were depicted as heroes of the road, living a life of freedom on the open road. Trucking culture peaked in the 1970's as they were glorified as modern days cowboys, outlaws, and rebels. Since then the portrayal has come with a more negative connotation as we see in the 1990's. Unfortunately, the depiction of truck drivers went from such a positive depiction to that of troubled serial killers.

Many modern trucks are powered by diesel engines, although small to medium size trucks with gas engines exist in the United States. The European Union rules that vehicles with a gross combination of mass up to 3,500 kg (7,716 lb) are also known as light commercial vehicles. Any vehicles exceeding that weight are known as large goods vehicles.

Medium trucks are larger than light but smaller than heavy trucks. In the US, they are defined as weighing between 13,000 and 33,000 pounds (6,000 and 15,000 kg). For the UK and the EU, the weight is between 3.5 and 7.5 tons (3.9 and 8.3 tons). Local delivery and public service (dump trucks, garbage trucks, and fire-fighting trucks) are around this size.

Trailer stability can be defined as the tendency of a trailer to dissipate side-to-side motion. The initial motion may be caused by aerodynamic forces, such as from a cross wind or a passing vehicle. One common criterion for stability is the center of mass location with respect to the wheels, which can usually be detected by tongue weight. If the center of mass of the trailer is behind its wheels, therefore having a negative tongue weight, the trailer will likely be unstable. Another parameter which is less commonly a factor is the trailer moment of inertia. Even if the center of mass is forward of the wheels, a trailer with a long load, and thus large moment of inertia, may be unstable.

Without strong land use controls, buildings are too often built in town right along a bypass. This results with the conversion of it into an ordinary town road, resulting in the bypass becoming as congested as the local streets. On the contrary, a bypass is intended to avoid such local street congestion. Gas stations, shopping centers, along with various other businesses are often built alongside them. They are built in hopes of easing accessibility, while home are ideally avoided for noise reasons.

A relatable reality t.v. show to the industry is the show Ice Road Truckers, which premiered season 3 on the History Channel in 2009. The show documents the lives of truck drivers working the scary Dalton Highway in Alaska. Following drivers as they compete to see which one of them can haul the most loads before the end of the season. It'll grab you with its mechanical problems that so many have experienced and as you watch them avoid the pitfalls of dangerous and icy roads!

DOT officers of each state are generally in charge of the enforcement of the Hours of Service (HOS). These are sometimes checked when CMVs pass through weigh stations. Drivers found to be in violation of the HOS can be forced to stop driving for a certain period of time. This, in turn, may negatively affect the motor carrier's safety rating. Requests to change the HOS are a source of debate. Unfortunately, many surveys indicate drivers routinely get away with violating the HOS. Such facts have started yet another debate on whether motor carriers should be required to us EOBRs in their vehicles. Relying on paper-based log books does not always seem to enforce the HOS law put in place for the safety of everyone.

The Federal Bridge Gross Weight Formula is a mathematical formula used in the United States to determine the appropriate gross weight for a long distance moving vehicle, based on the axle number and spacing. Enforced by the Department of Transportation upon long-haul truck drivers, it is used as a means of preventing heavy vehicles from damaging roads and bridges. This is especially in particular to the total weight of a loaded truck, whether being used for commercial moving services or for long distance moving services in general.   According to the Federal Bridge Gross Weight Formula, the total weight of a loaded truck (tractor and trailer, 5-axle rig) cannot exceed 80,000 lbs in the United States. Under ordinary circumstances, long-haul equipment trucks will weight about 15,000 kg (33,069 lbs). This leaves about 20,000 kg (44,092 lbs) of freight capacity. Likewise, a load is limited to the space available in the trailer, normally with dimensions of 48 ft (14.63 m) or 53 ft (16.15 m) long, 2.6 m (102.4 in) wide, 2.7 m (8 ft 10.3 in) high and 13 ft 6 in or 4.11 m high.

The definition of business logistics can be difficult to understand. Logistics can be simply put as a means of management that plans, implements, and controls the efficiency of the business. The notion of business logistics incorporates all sectors of the industry. It is used as a means to manage the fruition of project life cycles, supply chains, and resultant efficiency.

As the American Interstate Highway System began to expand in the 1950's, the trucking industry began to take over a large market share. That is, a large share of the transportation of goods throughout the country. Before this era, trains had been relied on to transport the bulk of the goods cross country or state to state. The Interstate Highway System was influential as it allows for merchandise to travel door to door with ease. Since then, truckload carriers have taken advantage of the interstate system, especially when performing a long distance move. Typically, they bring the merchandise from one distribution center of the country to another part of the country. The increase in truckload freight transportation has reduced the time it takes to transport the goods. Whether the freight was manufactured or produced for the different areas internationally, the time it takes to transport goods has decreased dramatically.  

Relocation, or moving, is the process of vacating a fixed location, such as a residence or business, and settling in a different one. A move might be to a nearby location such as in the same neighborhood or a much farther location in a different city or even a different country. Moving usually includes packing up all belongings, transferring them to the new location, and unpacking them. It will also be necessary to update administrative information. This includes tasks such as notifying the post office, changing registration data, change of insurance, services etc. It is important to remember this step in the relocation process. 

The concept of a bypass is a simple one. It is a road or highway that purposely avoids or "bypasses" a built-up area, town, or village. Bypasses were created with the intent to let through traffic flow without having to get stuck in local traffic. In general they are supposed to reduce congestion in a built-up area. By doing so, road safety will greatly improve.   A bypass designated for trucks traveling a long distance, either commercial or otherwise, is called a truck route.

In 1984 the animated TV series The Transformers told the story of a group of extraterrestrial humanoid robots. However, it just so happens that they disguise themselves as automobiles. Their leader of the Autobots clan, Optimus Prime, is depicted as an awesome semi-truck.

The decade of the 70's in the United States was a memorable one, especially for the notion of truck driving. This seemed to dramatically increase popularity among trucker culture. Throughout this era, and even in today's society, truck drivers are romanticized as modern-day cowboys and outlaws. These stereotypes were due to their use of Citizens Band (CB) radios to swap information with other drivers. Information regarding the locations of police officers and transportation authorities. The general public took an interest in the truckers 'way of life' as well. Both drivers and the public took interest in plaid shirts, trucker hats, CB radios, and CB slang.

Commercial trucks in the U.S. pay higher road taxes on a State level than the road vehicles and are subject to extensive regulation. This begs the question of why these trucks are paying more. I'll tell you. Just to name a few reasons, commercial truck pay higher road use taxes. They are much bigger and heavier than most other vehicles, resulting in more wear and tear on the roadways. They are also on the road for extended periods of time, which also affects the interstate as well as roads and passing through towns. Yet, rules on use taxes differ among jurisdictions.

In the United States and Canada, the cost for long-distance moves is generally determined by a few factors. The first is the weight of the items to be moved and the distance it will go. Cost is also based on how quickly the items are to be moved, as well as the time of the year or month which the move occurs. In the United Kingdom and Australia, it's quite different. They base price on the volume of the items as opposed to their weight. Keep in mind some movers may offer flat rate pricing.

The trucking industry has made a large historical impact since the early 20th century. It has affected the U.S. both politically as well as economically since the notion has begun. Previous to the invention of automobiles, most freight was moved by train or horse-drawn carriage. Trucks were first exclusively used by the military during World War I.   After the war, construction of paved roads increased. As a result, trucking began to achieve significant popularity by the 1930's. Soon after trucking became subject to various government regulation, such as the hours of service. During the later 1950's and 1960's, trucking accelerated due to the construction of the Interstate Highway System. The Interstate Highway System is an extensive network of freeways linking major cities cross country.

Alongside the many different trailers provided are motorcycle trailers. They are designed to haul motorcycles behind an automobile or truck. Depending on size and capability, some trailer may be able to carry several motorcycles or perhaps just one. They specifically designed this trailer to meet the needs of motorcyclists. They carry motorcycles, have ramps, and include tie-downs. There may be a utility trailer adapted permanently or occasionally to haul one or more motorcycles.

In the United States, shipments larger than about 7,000 kg (15,432 lb) are classified as truckload freight (TL). It is more efficient and affordable for a large shipment to have exclusive use of one larger trailer. This is opposed to having to share space on a smaller Less than Truckload freight carrier.

In 1999, The Simpsons episode Maximum Homerdrive aired. It featured Homer and Bart making a delivery for a truck driver named Red after he unexpectedly dies of 'food poisoning'.

The number one hit on the Billboard chart in 1976 was quite controversial for the trucking industry. "Convoy," is a song about a group of reckless truck drivers bent on evading laws such as toll booths and speed traps. The song went on to inspire the film "Convoy", featuring defiant Kris Kristofferson screaming "piss on your law!" After the film's release, thousands of independent truck drivers went on strike. The participated in violent protests during the 1979 energy crisis. However, similar strikes had occurred during the 1973 energy crisis.

All cars must pass some sort of emission check, such as a smog check to ensure safety. Similarly, trucks are subject to noise emission requirement, which is emanating from the U.S. Noise Control Act. This was intended to protect the public from noise health side effects. The loud noise is due to the way trucks contribute disproportionately to roadway noise. This is primarily due to the elevated stacks and intense tire and aerodynamic noise characteristics.

As we know in the trucking industry, some trailers are part of large trucks, which we call semi-trailer trucks for transportation of cargo. Trailers may also be used in a personal manner as well, whether for personal or small business purposes.

The United States' Interstate Highway System is full of bypasses and loops with the designation of a three-digit number. Usually beginning with an even digit, it is important to note that this pattern is highly inconsistent. For example, in Des Moines, Iowa the genuine bypass is the main route. More specifically, it is Interstate 35 and Interstate 80, with the loop into downtown Des Moines being Interstate 235. As it is illustrated in this example, they do not always consistently begin with an even number. However, the 'correct' designation is exemplified in Omaha, Nebraska. In Omaha, Interstate 480 traverses the downtown area, which is bypassed by Interstate 80, Interstate 680, and Interstate 95. Interstate 95 then in turn goes through Philadelphia, Pennsylvania. Furthermore, Interstate 295 is the bypass around Philadelphia, which leads into New Jersey. Although this can all be rather confusing, it is most important to understand the Interstate Highway System and the role bypasses play.

Public transportation is vital to a large part of society and is in dire need of work and attention. In 2010, the DOT awarded $742.5 million in funds from the American Recovery and Reinvestment Act to 11 transit projects. The awardees specifically focused light rail projects. One includes both a commuter rail extension and a subway project in New York City. The public transportation New York City has to offer is in need of some TLC. Another is working on a rapid bus transit system in Springfield, Oregon. The funds also subsidize a heavy rail project in northern Virginia. This finally completes the Washington Metropolitan Area Transit Authority's Metro Silver Line, connecting to Washington, D.C., and the Washington Dulles International Airport. This is important because the DOT has previously agreed to subsidize the Silver Line construction to Reston, Virginia.

The United States Department of Transportation has become a fundamental necessity in the moving industry. It is the pinnacle of the industry, creating and enforcing regulations for the sake of safety for both businesses and consumers alike. However, it is notable to appreciate the history of such a powerful department. The functions currently performed by the DOT were once enforced by the Secretary of Commerce for Transportation. In 1965, Najeeb Halaby, administrator of the Federal Aviation Adminstration (FAA), had an excellent suggestion. He spoke to the current President Lyndon B. Johnson, advising that transportation be elevated to a cabinet level position. He continued, suggesting that the FAA be folded or merged, if you will, into the DOT. Clearly, the President took to Halaby's fresh ideas regarding transportation, thus putting the DOT into place.

As of January 1, 2000, the Federal Motor Carrier Safety Administration (FMCSA) was established as its own separate administration within the U.S. Department of Transportation. This came about under the "Motor Carrier Safety Improvement Act of 1999". The FMCSA is based in Washington, D.C., employing more than 1,000 people throughout all 50 States, including in the District of Columbia. Their staff dedicates themselves to the improvement of safety among commercial motor vehicles (CMV) and to saving lives.

Full truckload carriers normally deliver a semi-trailer to a shipper who will fill the trailer with freight for one destination. Once the trailer is filled, the driver returns to the shipper to collect the required paperwork. Upon receiving the paperwork the driver will then leave with the trailer containing freight. Next, the driver will proceed to the consignee and deliver the freight him or herself. At times, a driver will transfer the trailer to another driver who will drive the freight the rest of the way. Full Truckload service (FTL) transit times are generally restricted by the driver's availability. This is according to Hours of Service regulations and distance. It is typically accepted that Full Truckload carriers will transport freight at an average rate of 47 miles per hour. This includes traffic jams, queues at intersections, other factors that influence transit time.  

The FMCSA has established rules to maintain and regulate the safety of the trucking industry. According to FMCSA rules, driving a goods-carrying CMV more than 11 hours or to drive after having been on duty for 14 hours, is illegal. Due to such heavy driving, they need a break to complete other tasks such as loading and unloading cargo, stopping for gas and other required vehicle inspections, as well as non-working duties such as meal and rest breaks. The 3-hour difference between the 11-hour driving limit and 14 hour on-duty limit gives drivers time to take care of such duties. In addition, after completing an 11 to 14 hour on duty period, the driver much be allowed 10 hours off-duty.

In 1991 the film "Thelma & Louise" premiered, rapidly becoming a well known movie. Throughout the movie, a dirty and abrasive truck driver harasses the two women during chance encounters. Author Michael Dunne describes this minor character as "fat and ignorant" and "a lustful fool blinded by a delusion of male superiority". Thelma and Louise exact their revenge by feigning interest in him and then blowing up his tanker truck full of gas.

Throughout the United States, bypass routes are a special type of route most commonly used on an alternative routing of a highway around a town. Specifically when the main route of the highway goes through the town. Originally, these routes were designated as "truck routes" as a means to divert trucking traffic away from towns. However, this name was later changed by AASHTO in 1959 to what we now call a "bypass". Many "truck routes" continue to remain regardless that the mainline of the highway prohibits trucks.

The 1980s were full of happening things, but in 1982 a Southern California truck driver gained short-lived fame. His name was Larry Walters, also known as "Lawn Chair Larry", for pulling a crazy stunt. He ascended to a height of 16,000 feet (4,900 m) by attaching helium balloons to a lawn chair, hence the name. Walters claims he only intended to remain floating near the ground and was shocked when his chair shot up at a rate of 1,000 feet (300 m) per minute. The inspiration for such a stunt Walters claims his poor eyesight for ruining his dreams to become an Air Force pilot.

Words have always had a different meaning or have been used interchangeably with others across all cultures. In the United States, Canada, and the Philippines the word "truck" is mostly reserved for larger vehicles. Although in Australia, New Zealand, and South Africa, the word "truck" is generally reserved for large vehicles. In Australia and New Zealand, a pickup truck is usually called a ute, short for "utility". While over in South Africa it is called a bakkie (Afrikaans: "small open container"). The United Kingdom, India, Malaysia, Singapore, Ireland, and Hong Kong use the "lorry" instead of truck, but only for medium and heavy types.