In 1895 Karl Benz designed and built the first truck in history by using the internal combustion engine. Later that year some of Benz's trucks gave into modernization and went on to become the first bus by the Netphener. This would be the first motor bus company in history. Hardly a year later, in 1986, another internal combustion engine truck was built by a man named Gottlieb Daimler. As people began to catch on, other companies, such as Peugeot, Renault, and Bussing, also built their own versions. In 1899, the first truck in the United States was built by Autocar and was available with two optional horsepower motors, 5 or 8.
A boat trailer is a trailer designed to launch, retrieve, carry and sometimes store boats.
The Motor Carrier Act, passed by Congress in 1935, replace the code of competition. The authorization the Interstate Commerce Commission (ICC) place was to regulate the trucking industry. Since then the ICC has been long abolished, however, it did quite a lot during its time. Based on the recommendations given by the ICC, Congress enacted the first hours of services regulation in 1938. This limited driving hours of truck and bus drivers. In 1941, the ICC reported that inconsistent weight limitation imposed by the states cause problems to effective interstate truck commerce.
Beginning the the early 20th century, the 1920's saw several major advancements. There was improvement in rural roads which was significant for the time. The diesel engine, which are 25-40% more efficient than gas engines were also a major breakthrough. We also saw the standardization of truck and trailer sizes along with fifth wheel coupling systems. Additionally power assisted brakes and steering developed. By 1933, all states had some form of varying truck weight regulation.
“ The first original song about truck driving appeared in 1939 when Cliff Bruner and His Boys recorded Ted Daffan's "Truck Driver's Blues," a song explicitly marketed to roadside cafe owners who were installing juke boxes in record numbers to serve truckers and other motorists.” - Shane Hamilton
Many modern trucks are powered by diesel engines, although small to medium size trucks with gas engines exist in the United States. The European Union rules that vehicles with a gross combination of mass up to 3,500 kg (7,716 lb) are also known as light commercial vehicles. Any vehicles exceeding that weight are known as large goods vehicles.
As most people have experienced, moving does involve having the appropriate materials. Some materials you might find at home or may be more resourceful to save money while others may choose to pay for everything. Either way materials such as boxes, paper, tape, and bubble wrap with which to pack box-able and/or protect fragile household goods. It is also used to consolidate the carrying and stacking on moving day. Self-service moving companies offer another viable option. It involves the person moving buying a space on one or more trailers or shipping containers. These containers are then professionally driven to the new location.
The Federal Bridge Law handles relations between the gross weight of the truck, the number of axles, and the spacing between them. This is how they determine is the truck can be on the Interstate Highway system. Each state gets to decide the maximum, under the Federal Bridge Law. They determine by vehicle in combination with axle weight on state and local roads
A semi-trailer is almost exactly what it sounds like, it is a trailer without a front axle. Proportionally, its weight is supported by two factors. The weight falls upon a road tractor or by a detachable front axle assembly, known as a dolly. Generally, a semi-trailer is equipped with legs, known in the industry as "landing gear". This means it can be lowered to support it when it is uncoupled. In the United States, a trailer may not exceed a length of 57 ft (17.37 m) on interstate highways. However, it is possible to link two smaller trailers together to reach a length of 63 ft (19.20 m).
AMSA wanted to help consumers avoid untrustworthy or illegitimate movers. In January 2008, AMSA created the ProMover certification program for its members. As a member, you must have federal interstate operating authority. Members are also required to pass an annual criminal back check, be licensed by the FMCSA, and agree to abide by ethical standards. This would include honesty in advertising and in business transaction with customers. Each must also sign a contract committing to adhere to applicable Surface Transportation Board and FMCSA regulations. AMSA also takes into consideration and examines ownership. They are very strict, registration with state corporation commissions. This means that the mover must maintain at least a satisfactory rating with the Better Business Bureau (BBB). As one can imagine, those that pass are authorized to display the ProMove logo on the websites and in marketing materials. However, those that fail will be expelled from the program (and AMSA) if they cannot correct discrepancies during probation.
Within the world of transportation, bypass routes are often very controversial. This is mostly due to the fact that they require the building of a road carrying heavy traffic where no road existed before. This has created conflict among society thus creating a divergence between those in support of bypasses and those who are opposed. Supporters believe they reduce congestion in built up areas. Those in opposition do not believe in developing (often rural) undeveloped land. In addition, the cities that are bypassed may also oppose such a project as reduced traffic may, in turn, reduce and damage business.
The American Association of State Highway and Transportation Officials (AASHTO) is an influential association as an advocate for transportation. Setting important standards, they are responsible for publishing specifications, test protocols, and guidelines. All which are used in highway design and construction throughout the United States. Despite its name, the association represents more than solely highways. Alongside highways, they focus on air, rail, water, and public transportation as well.
Compliance, Safety, and Accountability (CSA) are fundamental to the FMCSA's compliance program. The purpose of the CSA program is to oversee and focus on motor carriers' safety performance. To enforce such safety regulations, the CSA conducts roadside inspections and crash investigations. The program issues violations when instances of noncompliance with CSA safety regulations are exposed.
Unfortunately, the CSA's number of safety investigation teams and state law enforcement partners are rather small in comparison to the millions of CMV companies and commercial driver license (CDL) holders. A key factor in the CSA program is known as the Safety Measurement System (SMS). This system relies on data analysis to identify unsafe companies to arrange them for safety interventions. SMS is incredibly helpful to CSA in finding and holding companies accountable for safety performance.
As the American Interstate Highway System began to expand in the 1950's, the trucking industry began to take over a large market share. That is, a large share of the transportation of goods throughout the country. Before this era, trains had been relied on to transport the bulk of the goods cross country or state to state. The Interstate Highway System was influential as it allows for merchandise to travel door to door with ease. Since then, truckload carriers have taken advantage of the interstate system, especially when performing a long distance move. Typically, they bring the merchandise from one distribution center of the country to another part of the country. The increase in truckload freight transportation has reduced the time it takes to transport the goods. Whether the freight was manufactured or produced for the different areas internationally, the time it takes to transport goods has decreased dramatically.
Implemented in 2014, the National Registry, requires all Medical Examiners (ME) who conduct physical examinations and issue medical certifications for interstate CMV drivers to complete training on FMCSA’s physical qualification standards, must pass a certification test. This is to demonstrate competence through periodic training and testing. CMV drivers whose medical certifications expire must use MEs on the National Registry for their examinations.
FMCSA has reached its goal of at least 40,000 certified MEs signing onto the registry. All this means is that drivers or movers can now find certified medical examiners throughout the country who can perform their medical exam. FMCSA is preparing to issue a follow-on “National Registry 2” rule stating new requirements. In this case, MEs are to submit medical certificate information on a daily basis. These daily updates are sent to the FMCSA, which will then be sent to the states electronically. This process will dramatically decrease the chance of drivers falsifying medical cards.
The main purpose of the HOS regulation is to prevent accidents due to driver fatigue. To do this, the number of driving hours per day, as well as the number of driving hours per week, have been limited. Another measure to prevent fatigue is to keep drivers on a 21 to 24-hour schedule in order to maintain a natural sleep/wake cycle. Drivers must take a daily minimum period of rest and are allowed longer "weekend" rest periods. This is in hopes to combat cumulative fatigue effects that accrue on a weekly basis.
Business routes generally follow the original routing of the numbered route through a city or town. Beginning in the 1930s and lasting thru the 1970s was an era marking a peak in large-scale highway construction in the United States. U.S. Highways and Interstates were typically built in particular phases. Their first phase of development began with the numbered route carrying traffic through the center of a city or town. The second phase involved the construction of bypasses around the central business districts of the towns they began. As bypass construction continued, original parts of routes that had once passed straight thru a city would often become a "business route".
Released in 1998, the film Black Dog featured Patrick Swayze as a truck driver who made it out of prison. However, his life of crime continued, as he was manipulated into the transportation of illegal guns. Writer Scott Doviak has described the movie as a "high-octane riff on White Line Fever" as well as "a throwback to the trucker movies of the 70s".
In 1933, as a part of President Franklin D. Roosevelt’s “New Deal”, the National Recovery Administration requested that each industry creates a “code of fair competition”. The American Highway Freight Association and the Federated Trucking Associations of America met in the spring of 1933 to speak for the trucking association and begin discussing a code. By summer of 1933 the code of competition was completed and ready for approval. The two organizations had also merged to form the American Trucking Associations. The code was approved on February 10, 1934. On May 21, 1934, the first president of the ATA, Ted Rogers, became the first truck operator to sign the code. A special "Blue Eagle" license plate was created for truck operators to indicate compliance with the code.
Commercial trucks in the U.S. pay higher road taxes on a State level than the road vehicles and are subject to extensive regulation. This begs the question of why these trucks are paying more. I'll tell you. Just to name a few reasons, commercial truck pay higher road use taxes. They are much bigger and heavier than most other vehicles, resulting in more wear and tear on the roadways. They are also on the road for extended periods of time, which also affects the interstate as well as roads and passing through towns. Yet, rules on use taxes differ among jurisdictions.
