A boat trailer is a trailer designed to launch, retrieve, carry and sometimes store boats.
Prior to the 20th century, freight was generally transported overland via trains and railroads. During this time, trains were essential, and they were highly efficient at moving large amounts of freight. But, they could only deliver that freight to urban centers for distribution by horse-drawn transport. Though there were several trucks throughout this time, they were used more as space for advertising that for actual utility. At this time, the use of range for trucks was quite challenging. The use of electric engines, lack of paved rural roads, and small load capacities limited trucks to most short-haul urban routes.
A commercial driver's license (CDL) is a driver's license required to operate large or heavy vehicles.
In many countries, driving a truck requires a special driving license. The requirements and limitations vary with each different jurisdiction.
As we've learned the Federal-Aid Highway Act of 1956 was crucial in the construction of the Interstate Highway System. Described as an interconnected network of the controlled-access freeway. It also allowed larger trucks to travel at higher speeds through rural and urban areas alike. This act was also the first to allow the first federal largest gross vehicle weight limits for trucks, set at 73,208 pounds (33,207 kg). The very same year, Malcolm McLean pioneered modern containerized intermodal shipping. This allowed for the more efficient transfer of cargo between truck, train, and ships.
The intention of a trailer coupler is to secure the trailer to the towing vehicle. It is an important piece, as the trailer couple attaches to the trailer ball. This then forms a ball and socket connection. It allows for relative movement between the towing vehicle and trailer while towing over uneven road surfaces. The trailer ball should be mounted to the rear bumper or to a drawbar, which may be removable. The drawbar secures to the trailer hitch by inserting it into the hitch receiver and pinning it.
The three most common types of couplers used are straight couplers, A-frame couplers, and adjustable couplers. Another option is bumper-pull hitches in which case draw bars can exert a large amount of leverage on the tow vehicle. This makes it harder to recover from a swerving situation (thus it may not be the safest choice depending on your trip).
The public idea of the trucking industry in the United States popular culture has gone through many transformations. However, images of the masculine side of trucking are a common theme throughout time. The 1940's first made truckers popular, with their songs and movies about truck drivers. Then in the 1950's they were depicted as heroes of the road, living a life of freedom on the open road. Trucking culture peaked in the 1970's as they were glorified as modern days cowboys, outlaws, and rebels. Since then the portrayal has come with a more negative connotation as we see in the 1990's. Unfortunately, the depiction of truck drivers went from such a positive depiction to that of troubled serial killers.
With the partial deregulation of the trucking industry in 1980 by the Motor Carrier Act, trucking companies increased. The workforce was drastically de-unionized. As a result, drivers received a lower pay overall. Losing its spotlight in the popular culture, trucking had become less intimate as some unspoken competition broke out. However, the deregulation only increased the competition and productivity with the trucking industry as a whole. This was beneficial to the America consumer by reducing costs. In 1982 the Surface Transportation Assistance Act established a federal minimum truck weight limits. Thus, trucks were finally standardized truck size and weight limits across the country. This was also put in to place so that across country traffic on the Interstate Highways resolved the issue of the 'barrier states'.
“The association of truckers with cowboys and related myths was perhaps most obvious during the urban-cowboy craze of the late 1970s, a period that saw middle-class urbanites wearing cowboy clothing and patronizing simulated cowboy nightclubs. During this time, at least four truck driver movies appeared, CB radio became popular, and truck drivers were prominently featured in all forms of popular media.” — Lawrence J. Ouellet
Trucks of the era mostly used two-cylinder engines and had a carrying capacity of 1,500 to 2,000 kilograms (3,300 to 4,400 lb). In 1904, 700 heavy trucks were built in the United States, 1000 in 1907, 6000 in 1910, and 25000 in 1914.
A Benz truck modified by Netphener company (1895)
Signage of business routes varies, depending on the type of route they are derived from. Business routes paralleling U.S. and state highways usually have exactly the same shield shapes and nearly the same overall appearance as the routes they parallel, with a rectangular plate reading "BUSINESS" placed above the shield (either supplementing or replacing the directional plate, depending on the preference of the road agency). In order to better identify and differentiate alternate routes from the routes they parallel, some states such as Maryland are beginning to use green shields for business routes off U.S. highways. In addition, Maryland uses a green shield for business routes off state highways with the word "BUSINESS" in place of "MARYLAND" is used for a state route.
As of January 1, 2000, the Federal Motor Carrier Safety Administration (FMCSA) was established as its own separate administration within the U.S. Department of Transportation. This came about under the "Motor Carrier Safety Improvement Act of 1999". The FMCSA is based in Washington, D.C., employing more than 1,000 people throughout all 50 States, including in the District of Columbia. Their staff dedicates themselves to the improvement of safety among commercial motor vehicles (CMV) and to saving lives.
A properly fitted close-coupled trailer is fitted with a rigid tow bar. It then projects from its front and hooks onto a hook on the tractor. It is important to not that it does not pivot as a draw bar does.
As the American Interstate Highway System began to expand in the 1950's, the trucking industry began to take over a large market share. That is, a large share of the transportation of goods throughout the country. Before this era, trains had been relied on to transport the bulk of the goods cross country or state to state. The Interstate Highway System was influential as it allows for merchandise to travel door to door with ease. Since then, truckload carriers have taken advantage of the interstate system, especially when performing a long distance move. Typically, they bring the merchandise from one distribution center of the country to another part of the country. The increase in truckload freight transportation has reduced the time it takes to transport the goods. Whether the freight was manufactured or produced for the different areas internationally, the time it takes to transport goods has decreased dramatically.
Relocation, or moving, is the process of vacating a fixed location, such as a residence or business, and settling in a different one. A move might be to a nearby location such as in the same neighborhood or a much farther location in a different city or even a different country. Moving usually includes packing up all belongings, transferring them to the new location, and unpacking them. It will also be necessary to update administrative information. This includes tasks such as notifying the post office, changing registration data, change of insurance, services etc. It is important to remember this step in the relocation process.
The American Association of State Highway Officials (AASHO) was organized and founded on December 12, 1914. On November 13, 1973, the name was altered to the American Association of State Highway and Transportation Officials. This slight change in name reflects a broadened scope of attention towards all modes of transportation. Despite the implications of the name change, most of the activities it is involved in still gravitate towards highways.
The concept of a bypass is a simple one. It is a road or highway that purposely avoids or "bypasses" a built-up area, town, or village. Bypasses were created with the intent to let through traffic flow without having to get stuck in local traffic. In general they are supposed to reduce congestion in a built-up area. By doing so, road safety will greatly improve.
A bypass designated for trucks traveling a long distance, either commercial or otherwise, is called a truck route.
The American Association of State Highway and Transportation Officials (AASHTO) conducted a series of tests. These tests were extensive field tests of roads and bridges to assess damages to the pavement. In particular they wanted to know how traffic contributes to the deterioration of pavement materials. These tests essentially led to the 1964 recommendation by AASHTO to Congress. The recommendation determined the gross weight limit for trucks to be determined by a bridge formula table. This includes table based on axle lengths, instead of a state upper limit. By the time 1970 came around, there were over 18 million truck on America's roads.
Moving companies that operate within the borders of a particular state are usually regulated by the state DOT. Sometimes the public utility commission in that state will take care of it. This only applies to some of the U.S. states such as in California (California Public Utilities Commission) or Texas (Texas Department of Motor Vehicles. However, no matter what state you are in it is always best to make sure you are compliant with that state
