Beso Del Sol Holdings reviews
company logo

Beso Del Sol Holdings

company logo

Beso Del Sol Holdings

Beso Del Sol Holdings is one of the listed movers in your region.
Beso Del Sol Holdings can bring in your move well-situated with services who may personify with you every measure of the room.
have also disclosed to us that Beso Del Sol Holdings is the most good in this area. Take our Beso Del Sol Holdings reviews below for substantiation.

Beso Del Sol Holdings is one of the listed movers in your region.
Beso Del Sol Holdings can bring in your move well-situated with services who may personify with you every measure of the room.
have also disclosed to us that Beso Del Sol Holdings is the most good in this area. Take our Beso Del Sol Holdings reviews below for substantiation.

Membership(s) & License Info.

MEMBER OF BBB: YES

LICENSE INFO:

US DOT # 1931566

ICC MC # 965836

INSURANCE ON FILE: $750,000

REQUIRED: $750,000

YEAR OF ESTD: 5/1/2015

Hours of Operation

MONDAY-SATURDAY 6:30 AM - 6:30 PM

SUNDAYS 7:00 AM - 5:30 PM

Contact Info

TOLL FREE:

not available

PHONE:

(806) 780-8000

Address

Beso Del Sol Holdings 4711 W LOOP 289 Lubbock, TX 79414
Lubbock, TX 79414
Lubbock
Texas

Payment Options

ALL MAYOR CREDIT CARDS, CASH, PAYPAL AND CERTIFIED CHECKS

100.0% Recommended based on user reviews

Reviews

Reviews

Beso Del Sol Holdings

02/16/2016

There are no words to depict how amazing the folks at Beso Del Sol are!!! Three thin men went to my loft and the following thing I knew, they had piles of boxes on their backs and were out the entryway. It was similar to watching laborer ants. Adored it!! I couldn't trust how rapidly they moved everything into the truck. They even dissected my bed edge and set up it back together for me...a assignment that would have taken me over a hour took them 15 minutes.

Please Write Your Review Here


required
required (not published)

Did you know?

Did You Know

Question

The trucking industry has made a large historical impact since the early 20th century. It has affected the U.S. both politically as well as economically since the notion has begun. Previous to the invention of automobiles, most freight was moved by train or horse-drawn carriage. Trucks were first exclusively used by the military during World War I.
 
After the war, construction of paved roads increased. As a result, trucking began to achieve significant popularity by the 1930's. Soon after trucking became subject to various government regulation, such as the hours of service. During the later 1950's and 1960's, trucking accelerated due to the construction of the Interstate Highway System. The Interstate Highway System is an extensive network of freeways linking major cities cross country.

Question Trucks of the era mostly used two-cylinder engines and had a carrying capacity of 1,500 to 2,000 kilograms (3,300 to 4,400 lb). In 1904, 700 heavy trucks were built in the United States, 1000 in 1907, 6000 in 1910, and 25000 in 1914. A Benz truck modified by Netphener company (1895)

Question The year 1611 marked an important time for trucks, as that is when the word originated. The usage of "truck" referred to the small strong wheels on ships' cannon carriages. Further extending its usage in 1771, it came to refer to carts for carrying heavy loads. In 1916 it became shortened, calling it a "motor truck". While since the 1930's its expanded application goes as far as to say "motor-powered load carrier".

Question The United States' Interstate Highway System is full of bypasses and loops with the designation of a three-digit number. Usually beginning with an even digit, it is important to note that this pattern is highly inconsistent. For example, in Des Moines, Iowa the genuine bypass is the main route. More specifically, it is Interstate 35 and Interstate 80, with the loop into downtown Des Moines being Interstate 235. As it is illustrated in this example, they do not always consistently begin with an even number. However, the 'correct' designation is exemplified in Omaha, Nebraska. In Omaha, Interstate 480 traverses the downtown area, which is bypassed by Interstate 80, Interstate 680, and Interstate 95. Interstate 95 then in turn goes through Philadelphia, Pennsylvania. Furthermore, Interstate 295 is the bypass around Philadelphia, which leads into New Jersey. Although this can all be rather confusing, it is most important to understand the Interstate Highway System and the role bypasses play.

Question Logistics is generally the ability to organize and put in place many complex operations at a single time. It is the management of the flow of things to meet the needs of customers or corporations. Resources managed in logistics includes tangible items such as food, materials, animals, equipment, etc. Not to mention the items that are not tangible such as time and information. This means that the movement of physical items, such as in the moving industry, involves a clear understanding of solid workflow. Such logistics can involve the handling of necessary materials, producing, packaging, inventory, transportation, warehousing, and often security.

Question A Ministry of Transport (or) Transportation is responsible for transportation within a country. Administration usually falls upon the Minister for Transport. The term may also be applied to the departments or other government agencies administering transport in a nation who do not use ministers. There are various and vast responsibilities for agencies to oversee such as road safety. Others may include civil aviation, maritime transport, rail transport and so on. They continue to develop government transportation policy and organize public transit. All while trying to maintain and construct infrastructural projects. Some ministries have additional responsibilities in related policy areas as mentioned above.

Did You Know

Question In many countries, driving a truck requires a special driving license. The requirements and limitations vary with each different jurisdiction.

Question

The intention of a trailer coupler is to secure the trailer to the towing vehicle. It is an important piece, as the trailer couple attaches to the trailer ball. This then forms a ball and socket connection. It allows for relative movement between the towing vehicle and trailer while towing over uneven road surfaces. The trailer ball should be mounted to the rear bumper or to a drawbar, which may be removable. The drawbar secures to the trailer hitch by inserting it into the hitch receiver and pinning it.
 
The three most common types of couplers used are straight couplers, A-frame couplers, and adjustable couplers. Another option is bumper-pull hitches in which case draw bars can exert a large amount of leverage on the tow vehicle. This makes it harder to recover from a swerving situation (thus it may not be the safest choice depending on your trip).

Question In 1999, The Simpsons episode Maximum Homerdrive aired. It featured Homer and Bart making a delivery for a truck driver named Red after he unexpectedly dies of 'food poisoning'.

Question In 1971, author and director Steven Spielberg, debuted his first feature length film. His made-for-tv film, Duel, portrayed a truck driver as an anonymous stalker. Apparently there seems to be a trend in the 70's to negatively stigmatize truck drivers.

Question Many modern trucks are powered by diesel engines, although small to medium size trucks with gas engines exist in the United States. The European Union rules that vehicles with a gross combination of mass up to 3,500 kg (7,716 lb) are also known as light commercial vehicles. Any vehicles exceeding that weight are known as large goods vehicles.

Question The Federal Bridge Law handles relations between the gross weight of the truck, the number of axles, and the spacing between them. This is how they determine is the truck can be on the Interstate Highway system. Each state gets to decide the maximum, under the Federal Bridge Law. They determine by vehicle in combination with axle weight on state and local roads

Question Trailer stability can be defined as the tendency of a trailer to dissipate side-to-side motion. The initial motion may be caused by aerodynamic forces, such as from a cross wind or a passing vehicle. One common criterion for stability is the center of mass location with respect to the wheels, which can usually be detected by tongue weight. If the center of mass of the trailer is behind its wheels, therefore having a negative tongue weight, the trailer will likely be unstable. Another parameter which is less commonly a factor is the trailer moment of inertia. Even if the center of mass is forward of the wheels, a trailer with a long load, and thus large moment of inertia, may be unstable.

Question Within the world of transportation, bypass routes are often very controversial. This is mostly due to the fact that they require the building of a road carrying heavy traffic where no road existed before. This has created conflict among society thus creating a divergence between those in support of bypasses and those who are opposed. Supporters believe they reduce congestion in built up areas. Those in opposition do not believe in developing (often rural) undeveloped land. In addition, the cities that are bypassed may also oppose such a project as reduced traffic may, in turn, reduce and damage business.

Question In the United States, the Commercial Motor Vehicle Safety Act of 1986 established minimum requirements that must be met when a state issues a commercial driver's license CDL. It specifies the following types of license: - Class A CDL drivers. Drive vehicles weighing 26,001 pounds or greater, or any combination of vehicles weighing 26,001 pounds or greater when towing a trailer weighing more than 10,000 pounds. Transports quantities of hazardous materials that require warning placards under Department of Public Safety regulations. - Class A Driver License permits. Is a step in preparation for Class A drivers to become a Commercial Driver. - Class B CDL driver. Class B is designed to transport 16 or more passengers (including driver) or more than 8 passengers (including the driver) for compensation. This includes, but is not limited to, tow trucks, tractor trailers, and buses.

Question

Implemented in 2014, the National Registry, requires all Medical Examiners (ME) who conduct physical examinations and issue medical certifications for interstate CMV drivers to complete training on FMCSA’s physical qualification standards, must pass a certification test. This is to demonstrate competence through periodic training and testing. CMV drivers whose medical certifications expire must use MEs on the National Registry for their examinations.


FMCSA has reached its goal of at least 40,000 certified MEs signing onto the registry. All this means is that drivers or movers can now find certified medical examiners throughout the country who can perform their medical exam. FMCSA is preparing to issue a follow-on “National Registry 2” rule stating new requirements. In this case, MEs are to submit medical certificate information on a daily basis. These daily updates are sent to the FMCSA, which will then be sent to the states electronically. This process will dramatically decrease the chance of drivers falsifying medical cards.

Question There are many different types of trailers that are designed to haul livestock, such as cattle or horses. Most commonly used are the stock trailer, which is enclosed on the bottom but has openings at approximately. This opening is at the eye level of the animals in order to allow ventilation. A horse trailer is a much more elaborate form of stock trailer. Generally horses are hauled with the purpose of attending or participating in competition. Due to this, they must be in peak physical condition, so horse trailers are designed for the comfort and safety of the animals. They're typically well-ventilated with windows and vents along with specifically designed suspension. Additionally, horse trailers have internal partitions that assist animals staying upright during travel. It's also to protect other horses from injuring each other in transit. There are also larger horse trailers that may incorporate more specialized areas for horse tack. They may even include elaborate quarters with sleeping areas, bathroom, cooking facilities etc.

Question

A circumferential route refers to a public transportation system that follows the route in the shape of a circle. Over time a nickname developed in the European Union, calling transportation networks such as these a "ring road". This is no surprise as Europe has several famous "ring roads" such as the Berliner Ring, the Brussels Ring, the Amsterdam Ring, the Boulevard Périphérique around Paris and the Leeds Inner and Outer ring roads. Other countries adopted the term as well which in turn made the name go international. Australia's Melbourne's Western Ring Road and India's Hyderabad's Outer Ring Road both adopted the name. However in Canada, the term is most commonly used, with "orbital" used to a much lesser extent.
 
On the contrary, the United States calls many "ring roads" as belt-lines, beltways, or loops instead. For example, the Capital Beltway around Washington, D.C. Some ring roads use terminology such as "Inner Loop" and "Outer Loop". This is, of course, for the sake of directional sense, since compass directions cannot be determined around the entire loop.

Question

Although there are exceptions, city routes are interestingly most often found in the Midwestern area of the United States. Though they essentially serve the same purpose as business routes, they are different. They feature "CITY" signs as opposed to "BUSINESS" signs above or below route shields. Many of these city routes are becoming irrelevant for today's transportation. Due to this, they are being eliminated in favor of the business route designation.

Question The Federal-Aid Highway Amendments of 1974 established a federal maximum gross vehicle weight of 80,000 pounds (36,000 kg). It also introduced a sliding scale of truck weight-to-length ratios based on the bridge formula. Although, they did not establish a federal minimum weight limit. By failing to establish a federal regulation, six contiguous in the Mississippi Valley rebelled. Becoming known as the "barrier state", they refused to increase their Interstate weight limits to 80,000 pounds. Due to this, the trucking industry faced a barrier to efficient cross-country interstate commerce.

Question In 1933, as a part of President Franklin D. Roosevelt’s “New Deal”, the National Recovery Administration requested that each industry creates a “code of fair competition”. The American Highway Freight Association and the Federated Trucking Associations of America met in the spring of 1933 to speak for the trucking association and begin discussing a code. By summer of 1933 the code of competition was completed and ready for approval. The two organizations had also merged to form the American Trucking Associations. The code was approved on February 10, 1934. On May 21, 1934, the first president of the ATA, Ted Rogers, became the first truck operator to sign the code. A special "Blue Eagle" license plate was created for truck operators to indicate compliance with the code.

Question The most basic purpose of a trailer jack is to lift the trailer to a height that allows the trailer to hitch or unhitch to and from the towing vehicle. Trailer jacks may also be used for the leveling of the trailer during storage. To list a few common types of trailer jacks are A-frame jacks, swivel jacks, and drop-leg jacks. Other trailers, such as horse trailers, have a built-in jack at the tongue for this purpose.

Question In order to load or unload bots and other cargo to and from a trailer, trailer winches are designed for this purpose. They consist of a ratchet mechanism and cable. The handle on the ratchet mechanism is then turned to tighten or loosen the tension on the winch cable. Trailer winches vary, some are manual while others are motorized. Trailer winches are most typically found on the front of the trailer by towing an A-frame.

Question In today's popular culture, recreational vehicles struggle to find their own niche. Travel trailers or mobile home with limited living facilities, or where people can camp or stay have been referred to as trailers. Previously, many would refer to such vehicles as towable trailers.

Question In the United States and Canada, the cost for long-distance moves is generally determined by a few factors. The first is the weight of the items to be moved and the distance it will go. Cost is also based on how quickly the items are to be moved, as well as the time of the year or month which the move occurs. In the United Kingdom and Australia, it's quite different. They base price on the volume of the items as opposed to their weight. Keep in mind some movers may offer flat rate pricing.