C & S Moving reviews
company logo

C & S Moving

C & S Moving company logo

C & S Moving

Membership(s) & License Info.

MEMBER OF BBB: YES

LICENSE INFO:

US DOT # 2147413

ICC MC # 965836

INSURANCE ON FILE: $750,000

REQUIRED: $750,000

YEAR OF ESTD: 5/1/2015

Hours of Operation

MONDAY-SATURDAY 6:30 AM - 6:30 PM

SUNDAYS 7:00 AM - 5:30 PM

Contact Info

TOLL FREE:

not available

PHONE:

(301) 829-1081

Address

C & S Moving 13238 Jesse Smith Road Mount Airy, MD 21771
Mount Airy, MD 21771
Mount Airy
Maryland

Payment Options

ALL MAYOR CREDIT CARDS, CASH, PAYPAL AND CERTIFIED CHECKS

80.0% Recommended based on user reviews

Reviews

Reviews

C & S Moving

03/22/2019

Rude driver, almost caused me to have a head on collision

C & S Moving

01/30/2018

C & S Moving were awesome to work with from beginning to end. Would never use anyone else! They were so professional and polite. They made our very stressful move less stressful!!!

C & S Moving

02/15/2016

They are completely fabulous! I needed to call them a minute ago to help me with some extra pressing that should have been be done ASAP and they arrived inside of a half hour. They pack your things superior to anything you can! No occupation too enormous or little. So gracious, so neighborly, so dependable! Much obliged!

Was this audit …

C & S Moving

02/02/2016

They are a flat out joy to work with all the way. You can expect quick, RELIABLE evaluations, dependable landing the day of the move, simple printed material, and gracious and proficient moving teams who are VERY watchful with your belonging.

Please Write Your Review Here


required
required (not published)

Did you know?

Did You Know

Question In the United States, the term 'full trailer' is used for a freight trailer supported by front and rear axles and pulled by a drawbar. This term is slightly different in Europe, where a full trailer is known as an A-frame drawbar trail. A full trailer is 96 or 102 in (2.4 or 2.6 m) wide and 35 or 40 ft (11 or 12 m) long.

Question In 1978 Sylvester Stallone starred in the film "F.I.S.T.". The story is loosely based on the 'Teamsters Union'. This union is a labor union which includes truck drivers as well as its then president, Jimmy Hoffa.

Question All cars must pass some sort of emission check, such as a smog check to ensure safety. Similarly, trucks are subject to noise emission requirement, which is emanating from the U.S. Noise Control Act. This was intended to protect the public from noise health side effects. The loud noise is due to the way trucks contribute disproportionately to roadway noise. This is primarily due to the elevated stacks and intense tire and aerodynamic noise characteristics.

Question The year 1611 marked an important time for trucks, as that is when the word originated. The usage of "truck" referred to the small strong wheels on ships' cannon carriages. Further extending its usage in 1771, it came to refer to carts for carrying heavy loads. In 1916 it became shortened, calling it a "motor truck". While since the 1930's its expanded application goes as far as to say "motor-powered load carrier".

Question The FMCSA is a well-known division of the United States Department of Transportation (USDOT). It is generally responsible for the enforcement of FMCSA regulations. The driver of a CMV must keep a record of working hours via a log book. This record must reflect the total number of hours spent driving and resting, as well as the time at which the change of duty status occurred. In place of a log book, a motor carrier may choose to keep track of their hours using an electronic on-board recorder (EOBR). This automatically records the amount of time spent driving the vehicle.

Did You Know

Question Beginning the the early 20th century, the 1920's saw several major advancements. There was improvement in rural roads which was significant for the time. The diesel engine, which are 25-40% more efficient than gas engines were also a major breakthrough. We also saw the standardization of truck and trailer sizes along with fifth wheel coupling systems. Additionally power assisted brakes and steering developed. By 1933, all states had some form of varying truck weight regulation.

Question A trailer is not very difficult to categorize. In general, it is an unpowered vehicle towed by a powered vehicle. Trailers are most commonly used for the transport of goods and materials. Although some do enjoy recreational usage of trailers as well. 

Question The decade of the 70s saw the heyday of truck driving, and the dramatic rise in the popularity of "trucker culture". Truck drivers were romanticized as modern-day cowboys and outlaws (and this stereotype persists even today). This was due in part to their use of citizens' band (CB) radio to relay information to each other regarding the locations of police officers and transportation authorities. Plaid shirts, trucker hats, CB radios, and using CB slang were popular not just with drivers but among the general public.

Question According to the U.S. Census Bureau, 40 million United States citizens have moved annually over the last decade. Of those people who have moved in the United States, 84.5% of them have moved within their own state, 12.5% have moved to another state, and 2.3% have moved to another country.

Question In 1978 Sylvester Stallone starred in the film "F.I.S.T.". The story is loosely based on the 'Teamsters Union'. This union is a labor union which includes truck drivers as well as its then president, Jimmy Hoffa.

Question The moving industry in the United States was deregulated with the Household Goods Transportation Act of 1980. This act allowed interstate movers to issue binding or fixed estimates for the first time. Doing so opened the door to hundreds of new moving companies to enter the industry. This led to an increase in competition and soon movers were no longer competing on services but on price. As competition drove prices lower and decreased what were already slim profit margins, "rogue" movers began hijacking personal property as part of a new scam. The Federal Motor Carrier Safety Administration (FMCSA) enforces Federal consumer protection regulations related to the interstate shipment of household goods (i.e., household moves that cross State lines). FMCSA has held this responsibility since 1999, and the Department of Transportation has held this responsibility since 1995 (the Interstate Commerce Commission held this authority prior to its termination in 1995).

Question A moving scam is a scam by a moving company in which the company provides an estimate, loads the goods, then states a much higher price to deliver the goods, effectively holding the goods as lien but does this without do a change of order or revised estimate.

Question The American Trucking Associations initiated in 1985 with the intent to improve the industry's image. With public opinion declining the association tried numerous moves. One such move was changing the name of the "National Truck Rodeo" to the "National Driving Championship". This was due to the fact that the word rodeo seemed to imply recklessness and reckless driving.

Question Signage of business routes varies, depending on the type of route they are derived from. Business routes paralleling U.S. and state highways usually have exactly the same shield shapes and nearly the same overall appearance as the routes they parallel, with a rectangular plate reading "BUSINESS" placed above the shield (either supplementing or replacing the directional plate, depending on the preference of the road agency). In order to better identify and differentiate alternate routes from the routes they parallel, some states such as Maryland are beginning to use green shields for business routes off U.S. highways. In addition, Maryland uses a green shield for business routes off state highways with the word "BUSINESS" in place of "MARYLAND" is used for a state route.

Question

In 1938, the now-eliminated Interstate Commerce Commission (ICC) enforced the first Hours of Service (HOS) rules. Drivers became limited to 12 hours of work within a 15-hour period. At this time, work included loading, unloading, driving, handling freight, preparing reports, preparing vehicles for service, or performing any other duty in relation to the transportation of passengers or property.
 
The ICC intended for the 3-hour difference between 12 hours of work and 15 hours on-duty to be used for meals and rest breaks. This meant that the weekly max was limited to 60 hours over 7 days (non-daily drivers), or 70 hours over 8 days (daily drivers). With these rules in place, it allowed 12 hours of work within a 15-hour period, 9 hours of rest, with 3 hours for breaks within a 24-hour day.

Question

The FMCSA has established rules to maintain and regulate the safety of the trucking industry. According to FMCSA rules, driving a goods-carrying CMV more than 11 hours or to drive after having been on duty for 14 hours, is illegal. Due to such heavy driving, they need a break to complete other tasks such as loading and unloading cargo, stopping for gas and other required vehicle inspections, as well as non-working duties such as meal and rest breaks. The 3-hour difference between the 11-hour driving limit and 14 hour on-duty limit gives drivers time to take care of such duties. In addition, after completing an 11 to 14 hour on duty period, the driver much be allowed 10 hours off-duty.

Question

A circumferential route refers to a public transportation system that follows the route in the shape of a circle. Over time a nickname developed in the European Union, calling transportation networks such as these a "ring road". This is no surprise as Europe has several famous "ring roads" such as the Berliner Ring, the Brussels Ring, the Amsterdam Ring, the Boulevard Périphérique around Paris and the Leeds Inner and Outer ring roads. Other countries adopted the term as well which in turn made the name go international. Australia's Melbourne's Western Ring Road and India's Hyderabad's Outer Ring Road both adopted the name. However in Canada, the term is most commonly used, with "orbital" used to a much lesser extent.
 
On the contrary, the United States calls many "ring roads" as belt-lines, beltways, or loops instead. For example, the Capital Beltway around Washington, D.C. Some ring roads use terminology such as "Inner Loop" and "Outer Loop". This is, of course, for the sake of directional sense, since compass directions cannot be determined around the entire loop.

Question Business routes generally follow the original routing of the numbered route through a city or town. Beginning in the 1930s and lasting thru the 1970s was an era marking a peak in large-scale highway construction in the United States. U.S. Highways and Interstates were typically built in particular phases. Their first phase of development began with the numbered route carrying traffic through the center of a city or town. The second phase involved the construction of bypasses around the central business districts of the towns they began. As bypass construction continued, original parts of routes that had once passed straight thru a city would often become a "business route".

Question Throughout the United States, bypass routes are a special type of route most commonly used on an alternative routing of a highway around a town. Specifically when the main route of the highway goes through the town. Originally, these routes were designated as "truck routes" as a means to divert trucking traffic away from towns. However, this name was later changed by AASHTO in 1959 to what we now call a "bypass". Many "truck routes" continue to remain regardless that the mainline of the highway prohibits trucks.

Question The 1980s were full of happening things, but in 1982 a Southern California truck driver gained short-lived fame. His name was Larry Walters, also known as "Lawn Chair Larry", for pulling a crazy stunt. He ascended to a height of 16,000 feet (4,900 m) by attaching helium balloons to a lawn chair, hence the name. Walters claims he only intended to remain floating near the ground and was shocked when his chair shot up at a rate of 1,000 feet (300 m) per minute. The inspiration for such a stunt Walters claims his poor eyesight for ruining his dreams to become an Air Force pilot.

Question The decade of the 70's in the United States was a memorable one, especially for the notion of truck driving. This seemed to dramatically increase popularity among trucker culture. Throughout this era, and even in today's society, truck drivers are romanticized as modern-day cowboys and outlaws. These stereotypes were due to their use of Citizens Band (CB) radios to swap information with other drivers. Information regarding the locations of police officers and transportation authorities. The general public took an interest in the truckers 'way of life' as well. Both drivers and the public took interest in plaid shirts, trucker hats, CB radios, and CB slang.

Question With the onset of trucking culture, truck drivers often became portrayed as protagonists in popular media. Author Shane Hamilton, who wrote "Trucking Country: The Road to America's Wal-Mart Economy", focuses on truck driving. He explores the history of trucking and while connecting it development in the trucking industry. It is important to note, as Hamilton discusses the trucking industry and how it helps the so-called big-box stores dominate the U.S. marketplace. Hamilton certainly takes an interesting perspective historically speaking.

Question The industry intends to both consumers as well as moving companies, this is why there are Ministers of Transportation in the industry. They are there to set and maintain laws and regulations in place to create a safer environment. It offers its members professional service training and states the time that movers have been in existence. It also provides them with federal government representation and statistical industry reporting. Additionally, there are arbitration services for lost or damaged claims, publications, public relations, and annual tariff updates and awards. This site includes articles as well that give some direction, a quarterly data summary, and industry trends.

Question Heavy trucks. A cement mixer is an example of Class 8 heavy trucks. Heavy trucks are the largest on-road trucks, Class 8. These include vocational applications such as heavy dump trucks, concrete pump trucks, and refuse hauling, as well as ubiquitous long-haul 6×4 and 4x2 tractor units. Road damage and wear increase very rapidly with the axle weight. The axle weight is the truck weight divided by the number of axles, but the actual axle weight depends on the position of the load over the axles. The number of steering axles and the suspension type also influence the amount of the road wear. In many countries with good roads, a six-axle truck may have a maximum weight over 50 tons (49 long tons; 55 short tons).