In American English, the word "truck" has historically been preceded by a word describing the type of vehicle, such as a "tanker truck". In British English, preference would lie with "tanker" or "petrol tanker".
In many countries, driving a truck requires a special driving license. The requirements and limitations vary with each different jurisdiction.
As we've learned the Federal-Aid Highway Act of 1956 was crucial in the construction of the Interstate Highway System. Described as an interconnected network of the controlled-access freeway. It also allowed larger trucks to travel at higher speeds through rural and urban areas alike. This act was also the first to allow the first federal largest gross vehicle weight limits for trucks, set at 73,208 pounds (33,207 kg). The very same year, Malcolm McLean pioneered modern containerized intermodal shipping. This allowed for the more efficient transfer of cargo between truck, train, and ships.
In 1976, the number one hit on the Billboard chart was "Convoy," a novelty song by C.W. McCall about a convoy of truck drivers evading speed traps and toll booths across America. The song inspired the 1978 action film Convoy directed by Sam Peckinpah. After the film's release, thousands of independent truck drivers went on strike and participated in violent protests during the 1979 energy crisis (although similar strikes had occurred during the 1973 energy crisis).
In 1999, The Simpsons episode Maximum Homerdrive aired. It featured Homer and Bart making a delivery for a truck driver named Red after he unexpectedly dies of 'food poisoning'.
Very light trucks. Popular in Europe and Asia, many mini-trucks are factory redesigns of light automobiles, usually with monocoque bodies. Specialized designs with substantial frames such as the Italian Piaggio shown here are based upon Japanese designs (in this case by Daihatsu) and are popular for use in "old town" sections of European cities that often have very narrow alleyways. Regardless of the name, these small trucks serve a wide range of uses. In Japan, they are regulated under the Kei car laws, which allow vehicle owners a break on taxes for buying a smaller and less-powerful vehicle (currently, the engine is limited to 660 ccs {0.66L} displacement). These vehicles are used as on-road utility vehicles in Japan. These Japanese-made mini trucks that were manufactured for on-road use are competing with off-road ATVs in the United States, and import regulations require that these mini trucks have a 25 mph (40 km/h) speed governor as they are classified as low-speed vehicles. These vehicles have found uses in construction, large campuses (government, university, and industrial), agriculture, cattle ranches, amusement parks, and replacements for golf carts.Major mini truck manufacturers and their brands: Daihatsu Hijet, Honda Acty, Mazda Scrum, Mitsubishi Minicab, Subaru Sambar, Suzuki Carry
As with many things in Europe and Asia, the illusion of delicacy and proper manners always seems to attract tourists. Popular in Europe and Asia, mini trucks are factory redesigns of light automobiles with monochrome bodies. Such specialized designs with such great frames such as the Italian Piaggio, based upon Japanese designs. In this case it was based upon Japanese designs made by Daihatsu. These are very popular for use in "old town" sections of European cities, which often have very narrow alleyways. Despite whatever name they are called, these very light trucks serve a wide variety of purposes.
Yet, in Japan they are regulated under the Kei car laws, which allow vehicle owners a break in taxes for buying a small and less-powerful vehicle. Currently, the engine is limited to 660 cc [0.66L] displacement. These vehicles began being used as on-road utility vehicles in Japan. Classified as a low speed vehicle, these Japanese-made mini trucks were manufactured for on-road use for competing the the off-road ATVs in the United States. Import regulations require that the mini trucks have a 25 mph (40km/h) speed governor. Again, this is because they are low speed vehicles.
However, these vehicles have found numerous amounts of ways to help the community. They invest money into the government, universities, amusement parks, and replacements for golf cars. They have some major Japanese mini truck manufacturarers as well as brands such as: Daihatsu Hijet, Honda Acty, Mazda Scrum, Mitsubishit Minicab, Subaru Sambar, and Suzuki Carry.
Trucks and cars have much in common mechanically as well as ancestrally. One link between them is the steam-powered fardier Nicolas-Joseph Cugnot, who built it in 1769. Unfortunately for him, steam trucks were not really common until the mid 1800's. While looking at this practically, it would be much harder to have a steam truck. This is mostly due to the fact that the roads of the time were built for horse and carriages. Steam trucks were left to very short hauls, usually from a factory to the nearest railway station. In 1881, the first semi-trailer appeared, and it was in fact towed by a steam tractor manufactured by De Dion-Bouton. Steam-powered trucks were sold in France and in the United States, apparently until the eve of World War I. Also, at the beginning of World War II in the United Kingdom, they were known as 'steam wagons'.
The interstate moving industry in the United States maintains regulation by the FMCSA, which is part of the USDOT. With only a small staff (fewer than 20 people) available to patrol hundreds of moving companies, enforcement is difficult. As a result of such a small staff, there are in many cases, no regulations that qualify moving companies as 'reliable'. Without this guarantee, it is difficult to a consumer to make a choice. Although, moving companies can provide and often display a DOT license.
Trailer stability can be defined as the tendency of a trailer to dissipate side-to-side motion. The initial motion may be caused by aerodynamic forces, such as from a cross wind or a passing vehicle. One common criterion for stability is the center of mass location with respect to the wheels, which can usually be detected by tongue weight. If the center of mass of the trailer is behind its wheels, therefore having a negative tongue weight, the trailer will likely be unstable. Another parameter which is less commonly a factor is the trailer moment of inertia. Even if the center of mass is forward of the wheels, a trailer with a long load, and thus large moment of inertia, may be unstable.
Signage of business routes varies, depending on the type of route they are derived from. Business routes paralleling U.S. and state highways usually have exactly the same shield shapes and nearly the same overall appearance as the routes they parallel, with a rectangular plate reading "BUSINESS" placed above the shield (either supplementing or replacing the directional plate, depending on the preference of the road agency). In order to better identify and differentiate alternate routes from the routes they parallel, some states such as Maryland are beginning to use green shields for business routes off U.S. highways. In addition, Maryland uses a green shield for business routes off state highways with the word "BUSINESS" in place of "MARYLAND" is used for a state route.
In the United States, commercial truck classification is fixed by each vehicle's gross vehicle weight rating (GVWR). There are 8 commercial truck classes, ranging between 1 and 8. Trucks are also classified in a more broad way by the DOT's Federal Highway Administration (FHWA). The FHWA groups them together, determining classes 1-3 as light duty, 4-6 as medium duty, and 7-8 as heavy duty. The United States Environmental Protection Agency has its own separate system of emission classifications for commercial trucks. Similarly, the United States Census Bureau had assigned classifications of its own in its now-discontinued Vehicle Inventory and Use Survey (TIUS, formerly known as the Truck Inventory and Use Survey).
In 1938, the now-eliminated Interstate Commerce Commission (ICC) enforced the first Hours of Service (HOS) rules. Drivers became limited to 12 hours of work within a 15-hour period. At this time, work included loading, unloading, driving, handling freight, preparing reports, preparing vehicles for service, or performing any other duty in relation to the transportation of passengers or property.
The ICC intended for the 3-hour difference between 12 hours of work and 15 hours on-duty to be used for meals and rest breaks. This meant that the weekly max was limited to 60 hours over 7 days (non-daily drivers), or 70 hours over 8 days (daily drivers). With these rules in place, it allowed 12 hours of work within a 15-hour period, 9 hours of rest, with 3 hours for breaks within a 24-hour day.
The FMCSA has established rules to maintain and regulate the safety of the trucking industry. According to FMCSA rules, driving a goods-carrying CMV more than 11 hours or to drive after having been on duty for 14 hours, is illegal. Due to such heavy driving, they need a break to complete other tasks such as loading and unloading cargo, stopping for gas and other required vehicle inspections, as well as non-working duties such as meal and rest breaks. The 3-hour difference between the 11-hour driving limit and 14 hour on-duty limit gives drivers time to take care of such duties. In addition, after completing an 11 to 14 hour on duty period, the driver much be allowed 10 hours off-duty.
Throughout the United States, bypass routes are a special type of route most commonly used on an alternative routing of a highway around a town. Specifically when the main route of the highway goes through the town. Originally, these routes were designated as "truck routes" as a means to divert trucking traffic away from towns. However, this name was later changed by AASHTO in 1959 to what we now call a "bypass". Many "truck routes" continue to remain regardless that the mainline of the highway prohibits trucks.
The concept of a bypass is a simple one. It is a road or highway that purposely avoids or "bypasses" a built-up area, town, or village. Bypasses were created with the intent to let through traffic flow without having to get stuck in local traffic. In general they are supposed to reduce congestion in a built-up area. By doing so, road safety will greatly improve.
A bypass designated for trucks traveling a long distance, either commercial or otherwise, is called a truck route.
In 1984 the animated TV series The Transformers told the story of a group of extraterrestrial humanoid robots. However, it just so happens that they disguise themselves as automobiles. Their leader of the Autobots clan, Optimus Prime, is depicted as an awesome semi-truck.
The American Association of State Highway and Transportation Officials (AASHTO) conducted a series of tests. These tests were extensive field tests of roads and bridges to assess damages to the pavement. In particular they wanted to know how traffic contributes to the deterioration of pavement materials. These tests essentially led to the 1964 recommendation by AASHTO to Congress. The recommendation determined the gross weight limit for trucks to be determined by a bridge formula table. This includes table based on axle lengths, instead of a state upper limit. By the time 1970 came around, there were over 18 million truck on America's roads.
Light trucks are classified this way because they are car-sized, yet in the U.S. they can be no more than 6,300 kg (13,900 lb). These are used by not only used by individuals but also businesses as well. In the UK they may not weigh more than 3,500 kg (7,700 lb) and are authorized to drive with a driving license for cars. Pickup trucks, popular in North America, are most seen in North America and some regions of Latin America, Asia, and Africa. Although Europe doesn't seem to follow this trend, where the size of the commercial vehicle is most often made as vans.
