1-800-Pack-Rat

In the United States, the term 'full trailer' is used for a freight trailer supported by front and rear axles and pulled by a drawbar. This term is slightly different in Europe, where a full trailer is known as an A-frame drawbar trail. A full trailer is 96 or 102 in (2.4 or 2.6 m) wide and 35 or 40 ft (11 or 12 m) long.

A commercial driver's license (CDL) is a driver's license required to operate large or heavy vehicles.

In many countries, driving a truck requires a special driving license. The requirements and limitations vary with each different jurisdiction.

The public idea of the trucking industry in the United States popular culture has gone through many transformations. However, images of the masculine side of trucking are a common theme throughout time. The 1940's first made truckers popular, with their songs and movies about truck drivers. Then in the 1950's they were depicted as heroes of the road, living a life of freedom on the open road. Trucking culture peaked in the 1970's as they were glorified as modern days cowboys, outlaws, and rebels. Since then the portrayal has come with a more negative connotation as we see in the 1990's. Unfortunately, the depiction of truck drivers went from such a positive depiction to that of troubled serial killers.

With the partial deregulation of the trucking industry in 1980 by the Motor Carrier Act, trucking companies increased. The workforce was drastically de-unionized. As a result, drivers received a lower pay overall. Losing its spotlight in the popular culture, trucking had become less intimate as some unspoken competition broke out. However, the deregulation only increased the competition and productivity with the trucking industry as a whole. This was beneficial to the America consumer by reducing costs. In 1982 the Surface Transportation Assistance Act established a federal minimum truck weight limits. Thus, trucks were finally standardized truck size and weight limits across the country. This was also put in to place so that across country traffic on the Interstate Highways resolved the issue of the 'barrier states'.

Trailer stability can be defined as the tendency of a trailer to dissipate side-to-side motion. The initial motion may be caused by aerodynamic forces, such as from a cross wind or a passing vehicle. One common criterion for stability is the center of mass location with respect to the wheels, which can usually be detected by tongue weight. If the center of mass of the trailer is behind its wheels, therefore having a negative tongue weight, the trailer will likely be unstable. Another parameter which is less commonly a factor is the trailer moment of inertia. Even if the center of mass is forward of the wheels, a trailer with a long load, and thus large moment of inertia, may be unstable.

As we know in the trucking industry, some trailers are part of large trucks, which we call semi-trailer trucks for transportation of cargo. Trailers may also be used in a personal manner as well, whether for personal or small business purposes.

In some states, a business route is designated by adding the letter "B" after the number instead of placing a "Business" sign above it. For example, Arkansas signs US business route 71 as "US 71B". On some route shields and road signs, the word "business" is shortened to just "BUS". This abbreviation is rare and usually avoided to prevent confusion with bus routes.

A relatable reality t.v. show to the industry is the show Ice Road Truckers, which premiered season 3 on the History Channel in 2009. The show documents the lives of truck drivers working the scary Dalton Highway in Alaska. Following drivers as they compete to see which one of them can haul the most loads before the end of the season. It'll grab you with its mechanical problems that so many have experienced and as you watch them avoid the pitfalls of dangerous and icy roads!

As of January 1, 2000, the Federal Motor Carrier Safety Administration (FMCSA) was established as its own separate administration within the U.S. Department of Transportation. This came about under the "Motor Carrier Safety Improvement Act of 1999". The FMCSA is based in Washington, D.C., employing more than 1,000 people throughout all 50 States, including in the District of Columbia. Their staff dedicates themselves to the improvement of safety among commercial motor vehicles (CMV) and to saving lives.

Implemented in 2014, the National Registry, requires all Medical Examiners (ME) who conduct physical examinations and issue medical certifications for interstate CMV drivers to complete training on FMCSA’s physical qualification standards, must pass a certification test. This is to demonstrate competence through periodic training and testing. CMV drivers whose medical certifications expire must use MEs on the National Registry for their examinations.

FMCSA has reached its goal of at least 40,000 certified MEs signing onto the registry. All this means is that drivers or movers can now find certified medical examiners throughout the country who can perform their medical exam. FMCSA is preparing to issue a follow-on “National Registry 2” rule stating new requirements. In this case, MEs are to submit medical certificate information on a daily basis. These daily updates are sent to the FMCSA, which will then be sent to the states electronically. This process will dramatically decrease the chance of drivers falsifying medical cards.

Business routes generally follow the original routing of the numbered route through a city or town. Beginning in the 1930s and lasting thru the 1970s was an era marking a peak in large-scale highway construction in the United States. U.S. Highways and Interstates were typically built in particular phases. Their first phase of development began with the numbered route carrying traffic through the center of a city or town. The second phase involved the construction of bypasses around the central business districts of the towns they began. As bypass construction continued, original parts of routes that had once passed straight thru a city would often become a "business route".

The 1950's were quite different than the years to come. They were more likely to be considered "Knights of the Road", if you will, for helping stranded travelers. In these times truck drivers were envied and were viewed as an opposition to the book "The Organization Man". Bestseller in 1956, author William H. Whyte's novel describes "the man in the gray flannel suit", who sat in an office every day. He's describing a typical office style job that is very structured with managers watching over everyone. Truck drivers represented the opposite of all these concepts. Popular trucking songs glorified the life of drivers as independent "wanderers". Yet, there were attempts to bring back the factory style efficiency, such as using tachnographs. Although most attempts resulted in little success. Drivers routinely sabotaged and discovered new ways to falsify the machine's records.

In 1933, as a part of President Franklin D. Roosevelt’s “New Deal”, the National Recovery Administration requested that each industry creates a “code of fair competition”. The American Highway Freight Association and the Federated Trucking Associations of America met in the spring of 1933 to speak for the trucking association and begin discussing a code. By summer of 1933 the code of competition was completed and ready for approval. The two organizations had also merged to form the American Trucking Associations. The code was approved on February 10, 1934. On May 21, 1934, the first president of the ATA, Ted Rogers, became the first truck operator to sign the code. A special "Blue Eagle" license plate was created for truck operators to indicate compliance with the code.

Heavy trucks. A cement mixer is an example of Class 8 heavy trucks. Heavy trucks are the largest on-road trucks, Class 8. These include vocational applications such as heavy dump trucks, concrete pump trucks, and refuse hauling, as well as ubiquitous long-haul 6×4 and 4x2 tractor units. Road damage and wear increase very rapidly with the axle weight. The axle weight is the truck weight divided by the number of axles, but the actual axle weight depends on the position of the load over the axles. The number of steering axles and the suspension type also influence the amount of the road wear. In many countries with good roads, a six-axle truck may have a maximum weight over 50 tons (49 long tons; 55 short tons).

Commercial trucks in the U.S. pay higher road taxes on a State level than the road vehicles and are subject to extensive regulation. This begs the question of why these trucks are paying more. I'll tell you. Just to name a few reasons, commercial truck pay higher road use taxes. They are much bigger and heavier than most other vehicles, resulting in more wear and tear on the roadways. They are also on the road for extended periods of time, which also affects the interstate as well as roads and passing through towns. Yet, rules on use taxes differ among jurisdictions.

With the ending of World War I, several developments were made to enhance trucks. Such an example would be by putting pneumatic tires replaced the previously common full rubber versions. These advancements continued, including electric starters, power brakes, 4, 6, and 8 cylinder engines. Closed cabs and electric lighting followed. The modern semi-trailer truck also debuted. Additionally, touring car builders such as Ford and Renault entered the heavy truck market.

Many people are familiar with this type of moving, using truck rental services, or borrowing similar hardware, is known as DIY moving. Whoever is renting a truck or trailer large enough to carry their household goods may obtain moving equipment if necessary. Equipment may be items such as dollies, furniture pads, and cargo belts to protect furniture and to ease the moving process.