In 1895 Karl Benz designed and built the first truck in history by using the internal combustion engine. Later that year some of Benz's trucks gave into modernization and went on to become the first bus by the Netphener. This would be the first motor bus company in history. Hardly a year later, in 1986, another internal combustion engine truck was built by a man named Gottlieb Daimler. As people began to catch on, other companies, such as Peugeot, Renault, and Bussing, also built their own versions. In 1899, the first truck in the United States was built by Autocar and was available with two optional horsepower motors, 5 or 8.
In the United States, the term 'full trailer' is used for a freight trailer supported by front and rear axles and pulled by a drawbar. This term is slightly different in Europe, where a full trailer is known as an A-frame drawbar trail. A full trailer is 96 or 102 in (2.4 or 2.6 m) wide and 35 or 40 ft (11 or 12 m) long.
The Motor Carrier Act, passed by Congress in 1935, replace the code of competition. The authorization the Interstate Commerce Commission (ICC) place was to regulate the trucking industry. Since then the ICC has been long abolished, however, it did quite a lot during its time. Based on the recommendations given by the ICC, Congress enacted the first hours of services regulation in 1938. This limited driving hours of truck and bus drivers. In 1941, the ICC reported that inconsistent weight limitation imposed by the states cause problems to effective interstate truck commerce.
In the United States, shipments larger than about 7,000 kg (15,432 lb) are classified as truckload freight (TL). It is more efficient and affordable for a large shipment to have exclusive use of one larger trailer. This is opposed to having to share space on a smaller Less than Truckload freight carrier.
Very light trucks. Popular in Europe and Asia, many mini-trucks are factory redesigns of light automobiles, usually with monocoque bodies. Specialized designs with substantial frames such as the Italian Piaggio shown here are based upon Japanese designs (in this case by Daihatsu) and are popular for use in "old town" sections of European cities that often have very narrow alleyways. Regardless of the name, these small trucks serve a wide range of uses. In Japan, they are regulated under the Kei car laws, which allow vehicle owners a break on taxes for buying a smaller and less-powerful vehicle (currently, the engine is limited to 660 ccs {0.66L} displacement). These vehicles are used as on-road utility vehicles in Japan. These Japanese-made mini trucks that were manufactured for on-road use are competing with off-road ATVs in the United States, and import regulations require that these mini trucks have a 25 mph (40 km/h) speed governor as they are classified as low-speed vehicles. These vehicles have found uses in construction, large campuses (government, university, and industrial), agriculture, cattle ranches, amusement parks, and replacements for golf carts.Major mini truck manufacturers and their brands: Daihatsu Hijet, Honda Acty, Mazda Scrum, Mitsubishi Minicab, Subaru Sambar, Suzuki Carry
As with many things in Europe and Asia, the illusion of delicacy and proper manners always seems to attract tourists. Popular in Europe and Asia, mini trucks are factory redesigns of light automobiles with monochrome bodies. Such specialized designs with such great frames such as the Italian Piaggio, based upon Japanese designs. In this case it was based upon Japanese designs made by Daihatsu. These are very popular for use in "old town" sections of European cities, which often have very narrow alleyways. Despite whatever name they are called, these very light trucks serve a wide variety of purposes.
Yet, in Japan they are regulated under the Kei car laws, which allow vehicle owners a break in taxes for buying a small and less-powerful vehicle. Currently, the engine is limited to 660 cc [0.66L] displacement. These vehicles began being used as on-road utility vehicles in Japan. Classified as a low speed vehicle, these Japanese-made mini trucks were manufactured for on-road use for competing the the off-road ATVs in the United States. Import regulations require that the mini trucks have a 25 mph (40km/h) speed governor. Again, this is because they are low speed vehicles.
However, these vehicles have found numerous amounts of ways to help the community. They invest money into the government, universities, amusement parks, and replacements for golf cars. They have some major Japanese mini truck manufacturarers as well as brands such as: Daihatsu Hijet, Honda Acty, Mazda Scrum, Mitsubishit Minicab, Subaru Sambar, and Suzuki Carry.
Trailer stability can be defined as the tendency of a trailer to dissipate side-to-side motion. The initial motion may be caused by aerodynamic forces, such as from a cross wind or a passing vehicle. One common criterion for stability is the center of mass location with respect to the wheels, which can usually be detected by tongue weight. If the center of mass of the trailer is behind its wheels, therefore having a negative tongue weight, the trailer will likely be unstable. Another parameter which is less commonly a factor is the trailer moment of inertia. Even if the center of mass is forward of the wheels, a trailer with a long load, and thus large moment of inertia, may be unstable.
A semi-trailer is almost exactly what it sounds like, it is a trailer without a front axle. Proportionally, its weight is supported by two factors. The weight falls upon a road tractor or by a detachable front axle assembly, known as a dolly. Generally, a semi-trailer is equipped with legs, known in the industry as "landing gear". This means it can be lowered to support it when it is uncoupled. In the United States, a trailer may not exceed a length of 57 ft (17.37 m) on interstate highways. However, it is possible to link two smaller trailers together to reach a length of 63 ft (19.20 m).
AMSA wanted to help consumers avoid untrustworthy or illegitimate movers. In January 2008, AMSA created the ProMover certification program for its members. As a member, you must have federal interstate operating authority. Members are also required to pass an annual criminal back check, be licensed by the FMCSA, and agree to abide by ethical standards. This would include honesty in advertising and in business transaction with customers. Each must also sign a contract committing to adhere to applicable Surface Transportation Board and FMCSA regulations. AMSA also takes into consideration and examines ownership. They are very strict, registration with state corporation commissions. This means that the mover must maintain at least a satisfactory rating with the Better Business Bureau (BBB). As one can imagine, those that pass are authorized to display the ProMove logo on the websites and in marketing materials. However, those that fail will be expelled from the program (and AMSA) if they cannot correct discrepancies during probation.
A relatable reality t.v. show to the industry is the show Ice Road Truckers, which premiered season 3 on the History Channel in 2009. The show documents the lives of truck drivers working the scary Dalton Highway in Alaska. Following drivers as they compete to see which one of them can haul the most loads before the end of the season. It'll grab you with its mechanical problems that so many have experienced and as you watch them avoid the pitfalls of dangerous and icy roads!
A properly fitted close-coupled trailer is fitted with a rigid tow bar. It then projects from its front and hooks onto a hook on the tractor. It is important to not that it does not pivot as a draw bar does.
The term "lorry" has an ambiguous origin, but it is likely that its roots were in the rail transport industry. This is where the word is known to have been used in 1838 to refer to a type of truck (a freight car as in British usage) specifically a large flat wagon. It may derive from the verb lurry, which means to pull or tug, of uncertain origin. It's expanded meaning was much more exciting as "self-propelled vehicle for carrying goods", and has been in usage since 1911. Previously, unbeknownst to most, the word "lorry" was used for a fashion of big horse-drawn goods wagon.
Implemented in 2014, the National Registry, requires all Medical Examiners (ME) who conduct physical examinations and issue medical certifications for interstate CMV drivers to complete training on FMCSA’s physical qualification standards, must pass a certification test. This is to demonstrate competence through periodic training and testing. CMV drivers whose medical certifications expire must use MEs on the National Registry for their examinations.
FMCSA has reached its goal of at least 40,000 certified MEs signing onto the registry. All this means is that drivers or movers can now find certified medical examiners throughout the country who can perform their medical exam. FMCSA is preparing to issue a follow-on “National Registry 2” rule stating new requirements. In this case, MEs are to submit medical certificate information on a daily basis. These daily updates are sent to the FMCSA, which will then be sent to the states electronically. This process will dramatically decrease the chance of drivers falsifying medical cards.
In 1893, the Office of Road Inquiry (ORI) was established as an organization. However, in 1905 the name was changed to the Office Public Records (OPR). The organization then went on to become a division of the United States Department of Agriculture. As seen throughout history, organizations seem incapable of maintaining permanent names. So, the organization's name was changed three more times, first in 1915 to the Bureau of Public Roads and again in 1939 to the Public Roads Administration (PRA). Yet again, the name was later shifted to the Federal Works Agency, although it was abolished in 1949. Finally, in 1949, the name reverted to the Bureau of Public Roads, falling under the Department of Commerce. With so many name changes, it can be difficult to keep up to date with such organizations. This is why it is most important to research and educate yourself on such matters.
Unfortunately for the trucking industry, their image began to crumble during the latter part of the 20th century. As a result, their reputation suffered. More recently truckers have been portrayed as chauvinists or even worse, serial killers. The portrayals of semi-trailer trucks have focused on stories of the trucks becoming self-aware. Generally, this is with some extraterrestrial help.
The Federal-Aid Highway Amendments of 1974 established a federal maximum gross vehicle weight of 80,000 pounds (36,000 kg). It also introduced a sliding scale of truck weight-to-length ratios based on the bridge formula. Although, they did not establish a federal minimum weight limit. By failing to establish a federal regulation, six contiguous in the Mississippi Valley rebelled. Becoming known as the "barrier state", they refused to increase their Interstate weight limits to 80,000 pounds. Due to this, the trucking industry faced a barrier to efficient cross-country interstate commerce.
In 1933, as a part of President Franklin D. Roosevelt’s “New Deal”, the National Recovery Administration requested that each industry creates a “code of fair competition”. The American Highway Freight Association and the Federated Trucking Associations of America met in the spring of 1933 to speak for the trucking association and begin discussing a code. By summer of 1933 the code of competition was completed and ready for approval. The two organizations had also merged to form the American Trucking Associations. The code was approved on February 10, 1934. On May 21, 1934, the first president of the ATA, Ted Rogers, became the first truck operator to sign the code. A special "Blue Eagle" license plate was created for truck operators to indicate compliance with the code.
With the ending of World War I, several developments were made to enhance trucks. Such an example would be by putting pneumatic tires replaced the previously common full rubber versions. These advancements continued, including electric starters, power brakes, 4, 6, and 8 cylinder engines. Closed cabs and electric lighting followed. The modern semi-trailer truck also debuted. Additionally, touring car builders such as Ford and Renault entered the heavy truck market.