The trucking industry has made a large historical impact since the early 20th century. It has affected the U.S. both politically as well as economically since the notion has begun. Previous to the invention of automobiles, most freight was moved by train or horse-drawn carriage. Trucks were first exclusively used by the military during World War I.
After the war, construction of paved roads increased. As a result, trucking began to achieve significant popularity by the 1930's. Soon after trucking became subject to various government regulation, such as the hours of service. During the later 1950's and 1960's, trucking accelerated due to the construction of the Interstate Highway System. The Interstate Highway System is an extensive network of freeways linking major cities cross country.
In the United States, the term 'full trailer' is used for a freight trailer supported by front and rear axles and pulled by a drawbar. This term is slightly different in Europe, where a full trailer is known as an A-frame drawbar trail. A full trailer is 96 or 102 in (2.4 or 2.6 m) wide and 35 or 40 ft (11 or 12 m) long.
The Motor Carrier Act, passed by Congress in 1935, replace the code of competition. The authorization the Interstate Commerce Commission (ICC) place was to regulate the trucking industry. Since then the ICC has been long abolished, however, it did quite a lot during its time. Based on the recommendations given by the ICC, Congress enacted the first hours of services regulation in 1938. This limited driving hours of truck and bus drivers. In 1941, the ICC reported that inconsistent weight limitation imposed by the states cause problems to effective interstate truck commerce.
The intention of a trailer coupler is to secure the trailer to the towing vehicle. It is an important piece, as the trailer couple attaches to the trailer ball. This then forms a ball and socket connection. It allows for relative movement between the towing vehicle and trailer while towing over uneven road surfaces. The trailer ball should be mounted to the rear bumper or to a drawbar, which may be removable. The drawbar secures to the trailer hitch by inserting it into the hitch receiver and pinning it.
The three most common types of couplers used are straight couplers, A-frame couplers, and adjustable couplers. Another option is bumper-pull hitches in which case draw bars can exert a large amount of leverage on the tow vehicle. This makes it harder to recover from a swerving situation (thus it may not be the safest choice depending on your trip).
As most people have experienced, moving does involve having the appropriate materials. Some materials you might find at home or may be more resourceful to save money while others may choose to pay for everything. Either way materials such as boxes, paper, tape, and bubble wrap with which to pack box-able and/or protect fragile household goods. It is also used to consolidate the carrying and stacking on moving day. Self-service moving companies offer another viable option. It involves the person moving buying a space on one or more trailers or shipping containers. These containers are then professionally driven to the new location.
The moving industry in the United States was deregulated with the Household Goods Transportation Act of 1980. This act allowed interstate movers to issue binding or fixed estimates for the first time. Doing so opened the door to hundreds of new moving companies to enter the industry. This led to an increase in competition and soon movers were no longer competing on services but on price. As competition drove prices lower and decreased what were already slim profit margins, "rogue" movers began hijacking personal property as part of a new scam. The Federal Motor Carrier Safety Administration (FMCSA) enforces Federal consumer protection regulations related to the interstate shipment of household goods (i.e., household moves that cross State lines). FMCSA has held this responsibility since 1999, and the Department of Transportation has held this responsibility since 1995 (the Interstate Commerce Commission held this authority prior to its termination in 1995).
The United States' Interstate Highway System is full of bypasses and loops with the designation of a three-digit number. Usually beginning with an even digit, it is important to note that this pattern is highly inconsistent. For example, in Des Moines, Iowa the genuine bypass is the main route. More specifically, it is Interstate 35 and Interstate 80, with the loop into downtown Des Moines being Interstate 235. As it is illustrated in this example, they do not always consistently begin with an even number. However, the 'correct' designation is exemplified in Omaha, Nebraska. In Omaha, Interstate 480 traverses the downtown area, which is bypassed by Interstate 80, Interstate 680, and Interstate 95. Interstate 95 then in turn goes through Philadelphia, Pennsylvania. Furthermore, Interstate 295 is the bypass around Philadelphia, which leads into New Jersey. Although this can all be rather confusing, it is most important to understand the Interstate Highway System and the role bypasses play.
“Writer-director James Mottern said he was influenced by nuanced, beloved movies of the 1970s such as "The Last Detail" and "Five Easy Pieces." Mottern said his female trucker character began with a woman he saw at a Southern California truck stop — a "beautiful woman, bleach blonde ... skin tanned to leather walked like a Teamster, blue eyes.” - Paul Brownfield
The American Association of State Highway and Transportation Officials (AASHTO) is an influential association as an advocate for transportation. Setting important standards, they are responsible for publishing specifications, test protocols, and guidelines. All which are used in highway design and construction throughout the United States. Despite its name, the association represents more than solely highways. Alongside highways, they focus on air, rail, water, and public transportation as well.
The FMCSA is a well-known division of the United States Department of Transportation (USDOT). It is generally responsible for the enforcement of FMCSA regulations. The driver of a CMV must keep a record of working hours via a log book. This record must reflect the total number of hours spent driving and resting, as well as the time at which the change of duty status occurred. In place of a log book, a motor carrier may choose to keep track of their hours using an electronic on-board recorder (EOBR). This automatically records the amount of time spent driving the vehicle.
Compliance, Safety, and Accountability (CSA) are fundamental to the FMCSA's compliance program. The purpose of the CSA program is to oversee and focus on motor carriers' safety performance. To enforce such safety regulations, the CSA conducts roadside inspections and crash investigations. The program issues violations when instances of noncompliance with CSA safety regulations are exposed.
Unfortunately, the CSA's number of safety investigation teams and state law enforcement partners are rather small in comparison to the millions of CMV companies and commercial driver license (CDL) holders. A key factor in the CSA program is known as the Safety Measurement System (SMS). This system relies on data analysis to identify unsafe companies to arrange them for safety interventions. SMS is incredibly helpful to CSA in finding and holding companies accountable for safety performance.
In the moving industry, transportation logistics management is incredibly important. Essentially, it is the management that implements and controls efficiency, the flow of storage of goods, as well as services. This includes related information between the point of origin and the point of consumption to meet customer's specifications. Logistics is quite complex but can be modeled, analyzed, visualized, and optimized by simulation software. Generally, the goal of transportation logistics management is to reduce or cut the use of such resources. A professional working in the field of moving logistics management is called a logistician.
In 1893, the Office of Road Inquiry (ORI) was established as an organization. However, in 1905 the name was changed to the Office Public Records (OPR). The organization then went on to become a division of the United States Department of Agriculture. As seen throughout history, organizations seem incapable of maintaining permanent names. So, the organization's name was changed three more times, first in 1915 to the Bureau of Public Roads and again in 1939 to the Public Roads Administration (PRA). Yet again, the name was later shifted to the Federal Works Agency, although it was abolished in 1949. Finally, in 1949, the name reverted to the Bureau of Public Roads, falling under the Department of Commerce. With so many name changes, it can be difficult to keep up to date with such organizations. This is why it is most important to research and educate yourself on such matters.
The Federal-Aid Highway Amendments of 1974 established a federal maximum gross vehicle weight of 80,000 pounds (36,000 kg). It also introduced a sliding scale of truck weight-to-length ratios based on the bridge formula. Although, they did not establish a federal minimum weight limit. By failing to establish a federal regulation, six contiguous in the Mississippi Valley rebelled. Becoming known as the "barrier state", they refused to increase their Interstate weight limits to 80,000 pounds. Due to this, the trucking industry faced a barrier to efficient cross-country interstate commerce.
The American Association of State Highway and Transportation Officials (AASHTO) conducted a series of tests. These tests were extensive field tests of roads and bridges to assess damages to the pavement. In particular they wanted to know how traffic contributes to the deterioration of pavement materials. These tests essentially led to the 1964 recommendation by AASHTO to Congress. The recommendation determined the gross weight limit for trucks to be determined by a bridge formula table. This includes table based on axle lengths, instead of a state upper limit. By the time 1970 came around, there were over 18 million truck on America's roads.
In 1933, as a part of President Franklin D. Roosevelt’s “New Deal”, the National Recovery Administration requested that each industry creates a “code of fair competition”. The American Highway Freight Association and the Federated Trucking Associations of America met in the spring of 1933 to speak for the trucking association and begin discussing a code. By summer of 1933 the code of competition was completed and ready for approval. The two organizations had also merged to form the American Trucking Associations. The code was approved on February 10, 1934. On May 21, 1934, the first president of the ATA, Ted Rogers, became the first truck operator to sign the code. A special "Blue Eagle" license plate was created for truck operators to indicate compliance with the code.
Driver's licensing has coincided throughout the European Union in order to for the complex rules to all member states. Driving a vehicle weighing more than 7.5 tons (16,535 lb) for commercial purposes requires a certain license. This specialist licence type varies depending on the use of the vehicle and number of seat. Licences first acquired after 1997, the weight was reduced to 3,500 kilograms (7,716 lb), not including trailers.
Heavy trucks. A cement mixer is an example of Class 8 heavy trucks. Heavy trucks are the largest on-road trucks, Class 8. These include vocational applications such as heavy dump trucks, concrete pump trucks, and refuse hauling, as well as ubiquitous long-haul 6×4 and 4x2 tractor units. Road damage and wear increase very rapidly with the axle weight. The axle weight is the truck weight divided by the number of axles, but the actual axle weight depends on the position of the load over the axles. The number of steering axles and the suspension type also influence the amount of the road wear. In many countries with good roads, a six-axle truck may have a maximum weight over 50 tons (49 long tons; 55 short tons).
In today's society, there are rules and regulations everywhere you go, the same goes for commercial vehicles. The federal government has strict regulations that must be met, such as how many hours a driver may be on the clock. For example, 11 hours driving /14 hours on-duty followed by 10 hours off, with a max of 70 hours/8 days or 60 hours/7 days. They can also set rules deciding how much rest and sleep time is required, however, these are only a couple of regulations set. Any violations are often subject to harsh penalties. In some cases, there are instruments to track each driver's hours, which are becoming more necessary.
Known as a truck in the U.S., Canada, Australia, New Zealand, Puerto Rico, it is essentially a motor vehicle designed to transport cargo. Otherwise known as a lorry in the United Kingdom, Ireland, South Africa, and Indian Subcontinent. Trucks vary not only in their types, but also in size, power, and configuration, the smallest being mechanically like an automobile. Commercial trucks may be very large and powerful, configured to mount specialized equipment. These are necessary in the case of fire trucks, concrete mixers, and suction excavators etc.
