Prior to the 20th century, freight was generally transported overland via trains and railroads. During this time, trains were essential, and they were highly efficient at moving large amounts of freight. But, they could only deliver that freight to urban centers for distribution by horse-drawn transport. Though there were several trucks throughout this time, they were used more as space for advertising that for actual utility. At this time, the use of range for trucks was quite challenging. The use of electric engines, lack of paved rural roads, and small load capacities limited trucks to most short-haul urban routes.
Beginning the the early 20th century, the 1920's saw several major advancements. There was improvement in rural roads which was significant for the time. The diesel engine, which are 25-40% more efficient than gas engines were also a major breakthrough. We also saw the standardization of truck and trailer sizes along with fifth wheel coupling systems. Additionally power assisted brakes and steering developed. By 1933, all states had some form of varying truck weight regulation.
The decade of the 70s saw the heyday of truck driving, and the dramatic rise in the popularity of "trucker culture". Truck drivers were romanticized as modern-day cowboys and outlaws (and this stereotype persists even today). This was due in part to their use of citizens' band (CB) radio to relay information to each other regarding the locations of police officers and transportation authorities. Plaid shirts, trucker hats, CB radios, and using CB slang were popular not just with drivers but among the general public.
“Country music scholar Bill Malone has gone so far as to say that trucking songs account for the largest component of work songs in the country music catalog. For a style of music that has, since its commercial inception in the 1920s, drawn attention to the coal man, the steel drivin’ man, the railroad worker, and the cowboy, this certainly speaks volumes about the cultural attraction of the trucker in the American popular consciousness.” — Shane Hamilton
In the United States, a commercial driver's license is required to drive any type of commercial vehicle weighing 26,001 lb (11,794 kg) or more. In 2006 the US trucking industry employed 1.8 million drivers of heavy trucks.
All cars must pass some sort of emission check, such as a smog check to ensure safety. Similarly, trucks are subject to noise emission requirement, which is emanating from the U.S. Noise Control Act. This was intended to protect the public from noise health side effects. The loud noise is due to the way trucks contribute disproportionately to roadway noise. This is primarily due to the elevated stacks and intense tire and aerodynamic noise characteristics.
The interstate moving industry in the United States maintains regulation by the FMCSA, which is part of the USDOT. With only a small staff (fewer than 20 people) available to patrol hundreds of moving companies, enforcement is difficult. As a result of such a small staff, there are in many cases, no regulations that qualify moving companies as 'reliable'. Without this guarantee, it is difficult to a consumer to make a choice. Although, moving companies can provide and often display a DOT license.
In some states, a business route is designated by adding the letter "B" after the number instead of placing a "Business" sign above it. For example, Arkansas signs US business route 71 as "US 71B". On some route shields and road signs, the word "business" is shortened to just "BUS". This abbreviation is rare and usually avoided to prevent confusion with bus routes.
Without strong land use controls, buildings are too often built in town right along a bypass. This results with the conversion of it into an ordinary town road, resulting in the bypass becoming as congested as the local streets. On the contrary, a bypass is intended to avoid such local street congestion. Gas stations, shopping centers, along with various other businesses are often built alongside them. They are built in hopes of easing accessibility, while home are ideally avoided for noise reasons.
Business routes generally follow the original routing of the numbered route through a city or town. Beginning in the 1930s and lasting thru the 1970s was an era marking a peak in large-scale highway construction in the United States. U.S. Highways and Interstates were typically built in particular phases. Their first phase of development began with the numbered route carrying traffic through the center of a city or town. The second phase involved the construction of bypasses around the central business districts of the towns they began. As bypass construction continued, original parts of routes that had once passed straight thru a city would often become a "business route".
The 1950's were quite different than the years to come. They were more likely to be considered "Knights of the Road", if you will, for helping stranded travelers. In these times truck drivers were envied and were viewed as an opposition to the book "The Organization Man". Bestseller in 1956, author William H. Whyte's novel describes "the man in the gray flannel suit", who sat in an office every day. He's describing a typical office style job that is very structured with managers watching over everyone. Truck drivers represented the opposite of all these concepts. Popular trucking songs glorified the life of drivers as independent "wanderers". Yet, there were attempts to bring back the factory style efficiency, such as using tachnographs. Although most attempts resulted in little success. Drivers routinely sabotaged and discovered new ways to falsify the machine's records.
By the time 2006 came, there were over 26 million trucks on the United States roads, each hauling over 10 billion short tons of freight (9.1 billion long tons). This was representing almost 70% of the total volume of freight. When, as a driver or an automobile drivers, most automobile drivers are largely unfamiliar with large trucks. As as a result of these unaware truck drivers and their massive 18-wheeler's numerous blind spots. The Occupational Safety and Health Administration has determined that 70% of fatal automobile/tractor trailer accident happen for a reason. That being the result of "unsafe actions of automobile drivers". People, as well as drivers, need to realize the dangers of such large trucks and pay more attention. Likewise for truck drivers as well.
Smoke and the Bandit was released in 1977, becoming the third-highest grossing movie. Following only behind Star Wars Episode IV and Close Encounter of the Third Kind, all three movies making an impact on popular culture. Conveniently, during that same year, CB Bears debuted as well. The Saturday morning cartoon features mystery-solving bears who communicate by CB radio. As the 1970's decade began to end and the 80's broke through, the trucking phenomenon had wade. With the rise of cellular phone technology, the CB radio was no longer popular with passenger vehicles, but, truck drivers still use it today.
The American Association of State Highway and Transportation Officials (AASHTO) conducted a series of tests. These tests were extensive field tests of roads and bridges to assess damages to the pavement. In particular they wanted to know how traffic contributes to the deterioration of pavement materials. These tests essentially led to the 1964 recommendation by AASHTO to Congress. The recommendation determined the gross weight limit for trucks to be determined by a bridge formula table. This includes table based on axle lengths, instead of a state upper limit. By the time 1970 came around, there were over 18 million truck on America's roads.
1941 was a tough era to live through. Yet, President Roosevelt appointed a special committee to explore the idea of a "national inter-regional highway" system. Unfortunately, the committee's progress came to a halt with the rise of the World War II. After the war was over, the Federal-Aid Highway Act of 1944 authorized the designation of what are not termed 'Interstate Highways'. However, he did not include any funding program to build such highways. With limited resources came limited progress until President Dwight D. Eisenhower came along in 1954. He renewed interest in the 1954 plan. Although, this began and long and bitter debate between various interests. Generally, the opposing sides were considering where such funding would come from such as rail, truck, tire, oil, and farm groups. All who would overpay for the new highways and how.
The most basic purpose of a trailer jack is to lift the trailer to a height that allows the trailer to hitch or unhitch to and from the towing vehicle. Trailer jacks may also be used for the leveling of the trailer during storage. To list a few common types of trailer jacks are A-frame jacks, swivel jacks, and drop-leg jacks. Other trailers, such as horse trailers, have a built-in jack at the tongue for this purpose.
In order to load or unload bots and other cargo to and from a trailer, trailer winches are designed for this purpose. They consist of a ratchet mechanism and cable. The handle on the ratchet mechanism is then turned to tighten or loosen the tension on the winch cable. Trailer winches vary, some are manual while others are motorized. Trailer winches are most typically found on the front of the trailer by towing an A-frame.
In today's society, there are rules and regulations everywhere you go, the same goes for commercial vehicles. The federal government has strict regulations that must be met, such as how many hours a driver may be on the clock. For example, 11 hours driving /14 hours on-duty followed by 10 hours off, with a max of 70 hours/8 days or 60 hours/7 days. They can also set rules deciding how much rest and sleep time is required, however, these are only a couple of regulations set. Any violations are often subject to harsh penalties. In some cases, there are instruments to track each driver's hours, which are becoming more necessary.
In the United States and Canada, the cost for long-distance moves is generally determined by a few factors. The first is the weight of the items to be moved and the distance it will go. Cost is also based on how quickly the items are to be moved, as well as the time of the year or month which the move occurs. In the United Kingdom and Australia, it's quite different. They base price on the volume of the items as opposed to their weight. Keep in mind some movers may offer flat rate pricing.